Kyocera Koi User Manual

THIS MODEL PHONE MEETS THE GOVERNMENT’S

REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.

Your wireless phone is a radio transmitter and

receiver. It is designed and manufactured not to

exceed the emission limits for exposure to radio

frequency (RF) energy set by the Federal

Communications Commission of the U.S. Government.

These limits are part of comprehensive guidelines and

establish permitted levels of RF energy for the general

population. The guidelines are based on standards

that were developed by independent scientific

organizations through periodic and thorough

evaluation of scientific studies. The standards include

a substantial safety margin designed to assure the

safety of all persons, regardless of age and health.

The exposure standard for wireless mobile phones

employs a unit of measurement known as the Specific

Absorption Rate, or SAR. The SAR limit set by the

FCC is 1.6 W/kg.* Tests for SAR are conducted using

standard operating positions specified by the FCC

with the phone transmitting at its highest certified

power level in all tested frequency bands.

Although the SAR is determined at the highest

certified power level, the actual SAR level of the

phone while operating can be well below the

maximum value. This is because the phone is

designed to operate at multiple power levels so as to

use only the power required to reach the network. In

general, the closer you are to a wireless base station

antenna, the lower the power output.

The body-worn SAR values provided above were

obtained by using Kyocera Wireless Corp. [KWC]

supplied and approved case CV90-61296-01 and

holster CV90-L8010-01.

While there may be differences between the SAR levels

of various phones and at various positions, they all meet

the government requirement for safe exposure.

The FCC has granted an Equipment Authorization for

this model phone with all reported SAR levels evaluated

as in compliance with the FCC RF emission guidelines.

SAR information on this model phone is on file with the

FCC and can be found under the Display Grant section

http://www.fcc.gov/oet/fccid after searching on the

FCC ID: OVFKWC-KX2.

Additional information on SAR can be found on the

Cellular Telecommunications and Internet Association

(CTIA) web-site at

http://www.wow-com.com

* In the United States and Canada, the SAR limit for

mobile phones used by the public is 1.6 watts/kg (W/

kg) averaged over one gram of tissue. The standard

incorporates a substantial margin of safety to give

additional protection for the public and to account for

any variations in measurements.

Caution

The user is cautioned that changes or modifications

not expressly approved by the party responsible for

compliance could void the warranty and user’s

authority to operate the equipment.

Before a phone model is available for sale to the

public, it must be tested and certified to the FCC that it

does not exceed the limit established by the

government-adopted requirement for safe exposure.

The tests are performed in positions and locations

(e.g., at the ear and worn on the body) as required by

the FCC for each model. The highest SAR values for

this model phone are:

Optimize your phone’s performance

Use the guidelines on page 2 to learn how to optimize

the performance and life of your phone and battery.

Air bags

If your vehicle has an air bag, DO NOT place installed

or portable phone equipment or other objects over the

air bag or in the air bag deployment area. If equipment

is not properly installed, you and your passengers risk

serious injury.

AMPS mode – Head: 1.32 mW/g; Body-worn: 0.608 mW/g

PCS mode – Head: 0.85 mW/g; Body-worn: 0.310 mW/g

Body-worn measurements differ among phone

models, depending upon availability of accessories

and FCC requirements.

Blasting areas—Turn off your phone where blasting is in

progress. Observe restrictions, and follow any

regulations or rules.

Potentially explosive atmospheres—Turn off your phone

when you are in any area with a potentially explosive

atmosphere. Obey all signs and instructions. Sparks in

such areas could cause an explosion or fire, resulting

in bodily injury or death.

Medical devices

Pacemakers—Warning to pacemaker wearers:

Wireless phones, when in the ‘on’ position, have been

shown to interfere with pacemakers. The phone

should be kept at least six (6) inches away from the

pacemaker to reduce risk.

The Health Industry Manufacturers Association and

the wireless technology research community

recommend that you follow these guidelines to

minimize the potential for interference.

Areas with a potentially explosive atmosphere are

often, but not always, clearly marked. They include:

•

Always keep the phone at least six inches

(15 centimeters) away from your pacemaker when

the phone is turned on.

Do not carry your phone near your heart.

Use the ear opposite the pacemaker.

•

fueling areas such as gas stations

below deck on boats

transfer or storage facilities for fuel or chemicals

vehicles using liquefied petroleum gas, such as

propane or butane

areas where the air contains chemicals or

particles such as grain, dust, or metal powders

any other area where you would normally be

advised to turn off your vehicle engine

•

If you have any reason to suspect that interference

is taking place, turn off your phone immediately.

•

Hearing aids—Some digital wireless phones may interfere

with hearing aids. In the event of such interference, you

may want to consult your service provider or call the

customer service line to discuss alternatives.

Use with care

Other medical devices—If you use any other personal

medical device, consult the manufacturer of the

device to determine if it is adequately shielded from

external RF energy. Your physician may be able to

help you obtain this information.

In health care facilities—Turn your phone off in health

care facilities when instructed. Hospitals and health

care facilities may be using equipment that is sensitive

to external RF energy.

Use only in normal position (to ear). Avoid dropping,

hitting, bending, or sitting on the phone.

Keep phone dry

If the phone gets wet, turn the power off immediately

and contact your dealer. Water damage may not be

covered under warranty.

Resetting the phone

If the screen seems frozen and the keypad does not

respond to keypresses, reset the phone by completing

the following steps:

1. Remove the battery door.

2. Remove and replace the battery.

Potentially unsafe areas

Posted facilities—Turn your phone off in any facility

when posted notices require you to do so.

Aircraft—FCC regulations prohibit using your phone on

a plane that is in the air. Turn your phone off or switch

it to Airplane Mode before boarding aircraft.

If the problem persists, return the phone to the dealer

for service.

Vehicles—RF signals may affect improperly installed

or inadequately shielded electronic systems in motor

vehicles. Check with the manufacturer of the device

to determine if it is adequately shielded from external

RF energy.

Accessories

Battery and charger specifications

Use only Kyocera-approved accessories with Kyocera

phones. Use of any unauthorized accessories may be

dangerous and will invalidate the phone warranty if said

accessories cause damage or a defect to the phone.

Charger

Input

Output

CV90-60858-01

CV90-60859-01

Standard Battery:

100-240 VAC / 50/60 Hz

120 VAC / 60Hz

4.5 V 1.5 A

5.2 V 400 mA

To shop online for phone accessories, visit

www.kyocera-wireless.com/store

To order by phone, call (800) 349-4188

(U.S.A. only) or (858) 882-1410.

CV90-L6501-01: 3.7 V / 900 mAh

Extended Battery:

CV90-L6540-01; 3.7 V / 1400 mAh

Radio Frequency (RF) energy

Your telephone is a radio transmitter and receiver.

When it is on, it receives and sends out RF energy.

Your service provider’s network controls the power of

the RF signal. This power level can range from 0.006

to 0.6 watts.

In August 1996, the U.S. Federal Communications

Commission (FCC) adopted RF exposure guidelines

with safety levels for hand-held wireless phones.

These guidelines are consistent with the safety

standards previously set by both U.S. and

093 453 037

Kyocera Wireless Corp.

10300 Campus Point Drive, San Diego, CA 92121

U.S.A.

Visit us at www.kyocera-wireless.com

To purchase accessories, visit

www.kyocera-wireless.com/store

international standards bodies in the following reports:

•

ANSI C95.1 (American National Standards

Institute, 1992)

NCRP Report 86 (National Council on Radiation

Protection and Measurements, 1986)

ICNIRP (International Commission on Non-

Ionizing Radiation Protection, 1996)

Your phone complies with the standards set by these

reports and the FCC guidelines.

E911 mandates

Where service is available, this handset complies with

the Phase I and Phase II E911 Mandates issued by

the FCC.

CONTENTS

Getting Started. . . . . . . . . . . . . . . . . . . . . . 1

Sending and Receiving

Installing the battery . . . . . . . . . . . . . . . . . . . . . . 1

Getting to know your phone . . . . . . . . . . . . . . . . 3

Accessing keypad shortcuts. . . . . . . . . . . . . . . . . 4

Multimedia Messages . . . . . . . . . . . . . . . 38

Sending multimedia messages . . . . . . . . . . . . . 38

Receiving multimedia messages . . . . . . . . . . . . 39

Viewing multimedia messages. . . . . . . . . . . . . . 40

Making and Answering Calls . . . . . . . . . . 9

Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Using the speakerphone . . . . . . . . . . . . . . . . . . 10

Speed dialing . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Setting up voicemail . . . . . . . . . . . . . . . . . . . . . 13

Silencing an incoming call . . . . . . . . . . . . . . . . 13

Calling emergency services . . . . . . . . . . . . . . . . 13

Understanding roaming. . . . . . . . . . . . . . . . . . . 14

Customizing Your Phone . . . . . . . . . . . . 41

Silencing all sounds . . . . . . . . . . . . . . . . . . . . . 42

Choosing ringers . . . . . . . . . . . . . . . . . . . . . . . 42

Setting sounds for your phone . . . . . . . . . . . . . 43

Setting message alerts. . . . . . . . . . . . . . . . . . . . 44

Using shortcuts. . . . . . . . . . . . . . . . . . . . . . . . . 44

Personalizing the screen. . . . . . . . . . . . . . . . . . 45

Creating a secure environment . . . . . . . . . . . . . 47

Network settings . . . . . . . . . . . . . . . . . . . . . . . . 48

Data Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Setting position location . . . . . . . . . . . . . . . . . . 50

Storing Contacts . . . . . . . . . . . . . . . . . . . 16

Creating a new contact . . . . . . . . . . . . . . . . . . . 16

Editing or erasing a contact. . . . . . . . . . . . . . . . 16

Editing a phone number . . . . . . . . . . . . . . . . . . 17

Finding contact information . . . . . . . . . . . . . . . 18

10 Using Voice Recognition . . . . . . . . . . . . 51

Setting up voice dialing. . . . . . . . . . . . . . . . . . . 51

Calling using voice tags. . . . . . . . . . . . . . . . . . . 51

Calling using digit dialing . . . . . . . . . . . . . . . . . 52

Training voice recognition . . . . . . . . . . . . . . . . 53

Using the Camera . . . . . . . . . . . . . . . . . . 19

Setting up the camera for photos . . . . . . . . . . . 19

Taking a picture . . . . . . . . . . . . . . . . . . . . . . . . 21

Sending a picture . . . . . . . . . . . . . . . . . . . . . . . 22

Camera key map . . . . . . . . . . . . . . . . . . . . . . . . 22

Setting up the video camera . . . . . . . . . . . . . . . 23

Recording a video. . . . . . . . . . . . . . . . . . . . . . . 23

11 Tools & Games. . . . . . . . . . . . . . . . . . . . . 54

Voice Memo . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Tip Calculator. . . . . . . . . . . . . . . . . . . . . . . . . . 56

Calculator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Stopwatch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Entering Text, Numbers, and Symbols . 26

Using Media Gallery . . . . . . . . . . . . . . . . 29

Accessing files. . . . . . . . . . . . . . . . . . . . . . . . . . 29

Creating free space . . . . . . . . . . . . . . . . . . . . . . 31

Sending and Receiving Text Messages. 32

Sending text messages. . . . . . . . . . . . . . . . . . . . 32

Retrieving text messages . . . . . . . . . . . . . . . . . . 35

Customizing message settings . . . . . . . . . . . . . . 37

12 Connecting to the Internet . . . . . . . . . . . 60

Using the Web Browser. . . . . . . . . . . . . . . . . . . 60

13 Getting Help . . . . . . . . . . . . . . . . . . . . . . . 62

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Contents

GETTING STARTED

Opening and closing Koi

Your Kyocera Koi phone has a swivel function that

offers various features when open and closed.

These features are detailed throughout this guide.

Installing the battery

Your phone comes with a removable lithium ion

(LI Ion) battery. Hold the phone with the back

facing you.

To open the

1. Slide the tab at the bottom of the door up.

swivel, face the

phone screen

toward you and

gently slide the

swivel to the right

and up until it

clicks into place.

Remove the battery door.

2. Place the battery in

the phone casing with

the metal contacts

facing the right side

of the phone.

To close the

swivel, push it

down and to the

right until it

clicks into place.

3. Replace the battery

door by sliding the

notches into the

Important: Do not attempt to pull the swivel apart

from the base.

openings near the top

of the phone.

4. Lower the battery

door and slide the tab

at the bottom of the

door up and then

down to secure the

cover into place.

User Guide for the Kyocera Koi Phone

Common causes of battery drain

Charging the battery

•

Playing games or using the Web

Keeping backlighting on

Operating in analog ( ) mode. Your phone

switches between modes to find the best signal.

To set your phone to operate in a single mode,

You must have at least a partial charge in the

battery to make or receive calls. Fully charge the

battery before using the phone.

To charge the battery,

connect the AC adapter to the

jack on the bottom of the

phone, then plug the adapter

into a wall outlet.

select Menu

Digital/Analog

→

Settings

→

Network

→

•

Operating in digital mode when far away from a

base station or cell site.

The battery icon in the upper-right corner of the

screen tells you whether the phone is:

•

Using data cables or accessories.

Operating when no service is available, or

service is available intermittently.

•

Charging (the icon is animated)

Partially charged

•

High earpiece and ringer volume settings.

Repeating sound, vibration or lighted alerts.

Fully charged

Recharging the battery

You can safely recharge the battery at any time,

even if it has a partial charge.

Caring for the battery

General safety guidelines

•

Do not take apart, puncture, or short-circuit

the battery.

If you have not used the battery for more than a

month, recharge it before using your phone.

Avoid exposing the battery to extreme

temperatures, direct sunlight, or high humidity.

Never dispose of any battery in or near a fire – it

could explode.

Getting Started

Getting to know your phone

Home screen.

OK key selects a menu item or option.

Jack for hands-free headset (sold separately).

Left softkey accesses menus and functions.

Speakerphone key activates the speakerphone.

Send/Talk key starts or answers calls.

Keypad for entering enter numbers, letters, or symbols.

* Shift key changes the text mode in text entry.

Jacks for AC adapter (included) and data cable (sold separately).*

Camera key to take pictures and record videos.

Navigation key positions cursor during text entry. Scrolls through list.

Right softkey to access Contacts and other menu options.

Video key to initialize video mode while swivel is open.

End/Power key turns the phone on and off. Ends a call.

Back key erases characters in text entry. Returns to previous screen.

# Space key enters a space during text entry. Activates Silent mode.

0 Next key cycles through word choices during text entry.

Antenna extends for making and answering calls.

Lens cover for camera flash and lens.

Jog shuttle selects menus and operates camera while swivel is closed.

Camera lens

*Warning: Inserting an accessory into the

incorrect jack will damage the phone.

Camera flash

User Guide for the Kyocera Koi Phone

Accessing keypad shortcuts

Using Menus

Swivel closed

Jog shuttle shortcuts (swivel closed)

The following menu items are available with the

swivel closed by pressing the jog shuttle in once.

Press down to move between menu items.

From the home screen, pressing the jog shuttle

activates two shortcuts:

•

Press and hold down to access the recent

calls list.

•

Silent Mode: Silences the phone. Press in

twice to activate. The silent mode icon appears

at the top of the menu screen.

Press and hold in to activate voice dialing.

Navigation key

(swivel open)

From the home screen press the navigation key in

one of four directions to access three shortcuts and

one custom menu (see page 44 for instructions on

setting up your custom menu).

shortcuts

•

Keyguard: Locks the jog shuttle. The jog shuttle

is temporarily disabled when you open the swivel.

It is enabled when swivel is again closed. Press

and hold up to lock and unlock keyguard.

•

Voice Dialing: Initiates the voice dialing

prompt by pressing and holding in.

Call History: Accesses the last 60 calls from all

categories: missed, outgoing, incoming. To

return a recent call, highlight the number, and

press in.

•

Contacts: Accesses your contacts list. Highlight

the contact and press in to call.

Camera: Allows you to choose whether to take a

picture, record a video, or view camera

pictures or your video album.

•

Scheduler: Launches the month view of the

scheduler menu.

Media Gallery: View or listen to media.

Tip: To return to the home screen from any of

these menus, press the camera key

Getting Started

Swivel open

The following menu items are available to you with the swivel open:

Call History

All Calls

Messages

New Text Msg

Settings

Silent Mode

Tools & Games

Web Browser

Connects to Internet

Tetris^

Incoming Calls

Outgoing Calls

Missed Calls

Erase Call Lists

Call History Timer

All Calls Timer

New Picture Msg

Voicemail

InBox

Browser Alerts*

OutBox*

Saved

Sounds

Display

Convenience

Voice Features

Messaging

Security

Race 21^TM

Doodler^TM

Voice Memo

Scheduler

Alarm Clock

Tip Calculator

Calculator

Timer

Phone Info

Phone number,

software, ESN, icons

Drafts

Network

Accessories

Contacts

View All

Add New

Find Name

Msg Settings

Group Lists*

Erase Messages

Stopwatch

Add Voice Dial

Speed Dial List

Voice Dial List

Business List

Personal List

Information

Camera

Launches the camera

Media Gallery

Camera Pictures

Images

Sounds

Videos

*Not available on all phones, check with your service provider.

In this guide, an arrow → tells you to select an

option from a menu. For example, Menu

Settings means select Menu, then select the

Accessing menu items (swivel open)

To access menu items from the home screen:

→

•

Press

to select Menu

Settings option.

to select Contacts

* To change the way the menus appear, select

left, right, up, or down to view menus

then select Wheel

→

Settings

→

Display

Graphic, or List and press

→

Main Menu View,

and options.*

•

Press

to select a menu item.

See “Choosing a menu view” on page 45 for details.

to back up a menu level.

to return to the home screen.

User Guide for the Kyocera Koi Phone

Performing basic functions

Swivel closed

Note: The phone must be powered ON to perform the following functions.

To...

From the home screen...

Make a call

Press and hold in to initiate voice dialing. Contact must have voice

tag assigned (see page 51).

End a call

Press in.

Adjust volume during call

Acknowledge an alert

Access menus

Press up or down.

Press in when you see OK

Press in once.

Scroll menus

Press up and down.

Select menus

Highlight a menu or option and press in once.

Press and hold down.

Access Call History List

Set Silent Mode

Set Keyguard

Press in twice.

Press and hold up. To unlock, press and hold up again.

Take a picture

Open the camera lens cover. Press camera ke

Record a video

Open camera lens cover. Press in. Scroll down using and

select Video Mode. Press once. Recording continues until you

press again.

Getting Started

Swivel open

To...

From the home screen...

Turn the phone on

Press

and wait until the phone beeps.

Turn the phone off

Make a call

Press and hold

until the phone beeps.

Enter the number, and press

End a call

Press

Answer a call

Access voicemail

Verify your phone number

Press and hold

and follow the system prompts.

Select Menu

Press

→

Phone Info.

Silence the ringer on an

incoming call

, then

to answer.

Activate voice dialing

Launch the browser

Record a voice memo

Access recent calls list

Take a picture

Press

once and follow the prompts (see page 51).

Press and hold

left.

right.

Press

Open camera lens cover. Press camera ke

Open camera lens cover. Select Options. Scroll left or right on the

down.

Record a video

horizontal menu bar using to select the Video Mode option. Focus

on the image and select Record. When finished recording, select Stop

User Guide for the Kyocera Koi Phone

The battery is fully charged. The more

black bars, the greater the charge.

Understanding screen icons

These icons may appear on your phone’s screen.

The alarm clock is set.

The phone is operating in IS2000 (1X)

digital mode.

The phone is operating in IS95

digital mode.

The phone is operating in Analog

(FM) mode.

The phone is receiving a signal. You can

make and receive calls. Fewer bars

indicate a weaker signal.

The phone is in privacy mode or is

accessing a secure Web site.

High-speed (3G) data service is available

and active on your phone. Check with

your service provider for availability.

(blinking) The phone is sending high-

speed data.

(blinking) The phone is receiving high-

speed data.

High-speed data service is available, but

the phone is dormant.

A call is in progress.

The phone is not receiving a signal. You

cannot make or receive calls.

The phone is roaming outside of its home

service area.

The phone is at the home screen. To

access Menu, press

The phone is at the home screen. To

access Contacts, press

You have a text message.

(

indicates the message is urgent.)

The phone is set to light up instead

of ring.

The phone is set to vibrate or to vibrate

and then ring.

Position location is set to your service

provider and to emergency services.

Position location is set to emergency

services only.

You have a voice message.

You have a voice/text message.

The phone is in camera mode.

Camera flash mode is ready.

Camera timer mode is ready.

Camera zoom mode is ready.

The phone is in video mode.

Getting Started

MAKING AND ANSWERING CALLS

Making a call

Ending a call

Swivel open

Make sure you are in an area where a signal can be

received. Look for

on the home screen. The

•

Press

or close swivel (if “End with

more bars you see in this symbol, the stronger the

signal. If there are no bars, move to where the

signal strength is better.

Swivel” is enabled. See page 10).

Swivel closed

Press in once.

When the phone has been idle for a time, it changes

to power save mode. When you see “Power Save”

on your phone’s screen, press any key to return to

normal operating mode.

•

Redialing a number

Swivel open

1. Open the swivel.

•

To redial a recent call, press

access your recent calls. Highlight a phone

number, and press

Tip: To redial the last number called, received,

or missed, press three times. If you see a

twice to

2. Enter the phone number.

3. Press

Swivel closed

message prompting you to speak a name, press

two more times.

You can only use the voice dialing feature when

calling with the swivel closed. Voice dialing

requires that a contact be saved with a voice tag.

See page 51.

Swivel closed

•

Press and hold down to launch the call

1. Press and hold in to initiate voice dialing.

history list. Highlight a caller and press in.

2. Say the name of the contact when prompted.

The phone places the call.

User Guide for the Kyocera Koi Phone

•

Ignore Call to immediately send the caller to

voicemail. Missed Call appears on your screen

until the caller leaves a message.

Calling a saved number

If you have already saved a phone number, you can

use the Contacts list to find it quickly.

Note: In the absence of voicemail, this feature

drops the call.

1. Press

or to select Contacts.

2. Scroll down the list to find the contact you want

to call.

Answering calls using the swivel

You can set the phone to answer immediately when

you open the swivel. This feature does not apply to

incoming data/fax calls.

3. Highlight the name and press

or in to

dial the number.

Answering calls

1. Select Menu

→

Settings

→

Convenience

→

When a call comes in, the phone rings, vibrates,

or lights up, and a dancing phone icon appears.

The phone number of the caller also appears if it is

not restricted. If the number is stored in your

Contacts directory, the contact name appears.

Swivel Answer.

2. Select Enabled to set the phone to answer when

you open the swivel.

Select Disabled to have the phone continue

ringing when you open the swivel.

Swivel open

•

Press

to answer the incoming call

Using the speakerphone

Your Kyocera Koi phone has a built-in

speakerphone that you can use during a call when

the swivel is open.

-or-

•

Press

to answer the incoming call and turn

on the speakerphone.

Turn on the speakerphone

Swivel closed

Press in to select Answer Call

Press

to turn on the speakerphone at any time

•

while the swivel is open.

To silence or ignore the call

When an incoming call is received, you can choose to:

•

During an incoming call alert, press

to answer the call and turn on the

speakerphone simultaneously

•

Silence Ringer to stop the ringing. Ringer

Silenced icon appears on your phone. You can

still answer the call or let the call go to voicemail.

Once the speakerphone is turned on,

“

Speaker is ON” displays on the screen.

Making and Answering Calls

Turn off the speakerphone

Viewing recent call details

•

Press

to turn off the speakerphone.

Details on the last 60 calls you made, received, or

missed are stored in the Call History list and are

identified by the following icons:

The message “

the screen.

Speaker is OFF” displays on

Outgoing call

Incoming call

Dealing with missed calls

When you have missed a call, “Missed Call” appears

on your screen unless the caller leaves a voicemail.

Missed call (flashing)

Viewing recent calls

Swivel open

1. Select Menu

→

Call History

•

To clear the screen, press in or

select OK

2. Select a list: All Calls

Incoming Calls Outgoing

Calls, or Missed Calls

To view details of the call, press

highlight Missed Calls, then press

down to

twice

3. Select a recent call item.

4. Press to select Options

To return the call, highlight Missed Calls, then

press

–

Save adds the phone number to the

Contacts list.

Swivel closed

–

Add to adds the phone number to a

•

To clear the screen, press in to select OK.

saved contact.

•

To return the call, press down to highlight

–

Send Msg sends a text message to the contact.

Missed Calls and then press in twice.

Send Picture Msg sends a picture message

to the contact.

Setting missed call alerts

You can set an alert to beep every five minutes after

you have missed a call.

–

Prepend adds an area code to the number if

you plan to save the number as a contact.

•

elec

enu

→

Settings

→

Sounds

→

Note: If the phone number has been classified as

“secret,” you must enter your four-digit lock code

to view or edit it. For information on the lock code,

see “Changing your lock code” on page 47.

To classify a phone number as secret, see “Creating

a new contact” on page 16.

Missed Call Alert

→

Enabled

User Guide for the Kyocera Koi Phone

Calling recent calls

Swivel open

Using speed dialing

To call a contact that has a speed dial location:

•

From the home screen, enter the one- or two-

digit speed dialing location and press

1. Press

2. Highlight the number you want to call.

3. Press

down.

1-Touch dialing

1-Touch dialing is the fastest way to speed dial a

contact that has a speed dial location.

Swivel closed

1. Press and hold down.

2. Highlight the number you want to call.

3. Press in.

Note: You must (1) enable 1-Touch dialing on your

phone and (2) have a speed dial location assigned

to a contact. See “1-Touch dialing” on this page.

Erasing recent calls

Enabling 1-Touch dialing

1. Select Menu

2. Select an option: All Calls, Incoming Calls

Outgoing Calls, or Missed Calls

→

Call History

→

Erase Call Lists.

1. Select Menu

→

Settings

→

Convenience

→

1-Touch Dialing

→

Enabled.

2. Press

Using 1-Touch dialing

To call a contact that has a speed dial location:

3. Press

to select Yes.

Speed dialing

Speed dialing allows you to quickly dial a stored

phone number by entering a one- or two-digit speed

dialing location number and pressing

•

From the home screen, press and hold the

speed dialing number. If it is a two-digit

number, press the first digit briefly, then press

and hold the second digit. For example, if the

Note: Before you can use speed dialing, you must

save a phone number as a contact and assign a

speed dial location to it. Refer to “Creating a new

contact” on page 16 to create a new contact, or

“Editing or erasing a contact” on page 16 to add

speed dial to an existing contact.

speed dialing location is 15, press

then press and hold

briefly,

Making and Answering Calls

If you see only the

Swivel open

1. Press and hold

symbol

Setting up voicemail

Before your phone can receive voicemail messages,

you must set up a password and record a personal

greeting with your service provider. When you have

set up your voicemail, all unanswered calls to your

phone are automatically transferred to voicemail,

even if your phone is in use or turned off.

to initiate a call to your

voicemail number.

2. Follow the prompts to retrieve the message.

•

You can set the phone to beep or vibrate every five

minutes to remind you that you have voicemail.

See “Setting message alerts” on page 44.

1. From the home screen, press and hold

2. Press at the message.

Swivel closed

3. Follow the system prompts to create a password

•

Press in to call voicemail.

and record a greeting.

•

Press down to ignore.

Note: If you are having trouble accessing your

voicemail, contact your service provider.

Silencing an incoming call

To silence an incoming call quickly, press

. Then press to answer the call.

•

Checking voicemail messages

When a voice message is received, your screen

displays “New Messages” along with the

symbol at the top of your screen. The symbol

flashes if the message is urgent.

This action silences the current call only. The next

call will ring as normal.

Adjusting the volume during a call

If you see “New Messages”

Swivel open or closed

•

To adjust the earpiece volume during a call,

press up or down.

1. Press

or to select Call, which initiates a

Calling emergency services

call to your voicemail number.

Note: Regardless of your 3-digit emergency code

(911, 111, 999, 000, etc.), your phone operates as

described below.

2. Follow the prompts to retrieve the message.

To clear the screen without checking messages:

•

Press

or to select Ignore.

•

Dial your 3-digit emergency code and

press

User Guide for the Kyocera Koi Phone

You can call the code even if your phone is locked or

your account is restricted. When you call, your phone

enters Emergency mode. This enables the emergency

service exclusive access to your phone to call you

back, if necessary. To make or receive regular calls

after dialing the code, you must exit this mode.

Timing your calls

You can set your phone to beep 10 seconds before

each minute passes when you are on a call.

•

Select Menu

→

Settings

Enabled

→

Sounds

→

Minute Alert

Receiving data or faxes

Your phone may be able to receive certain data or

faxes, depending on the system sending the

information. For more information, see page 49.

To exit Emergency mode

When you have completed the emergency call:

1. Press

to select Exit

2. Press

again to confirm your choice.

Note: To determine who has access to your

location, see “Setting position location” on page 50.

Understanding roaming

Controlling network roaming

Tracking calls

Depending on services available from your service

provider, you may set the phone to either digital or

analog mode. This is useful if you are in an area that

borders on digital service and the automatic feature is

causing the phone to keep switching between modes.

You can track the number and duration of calls

made and received on your phone.

1. Select Menu

→

Call History.

2. Select a timer:

1. Select Menu

→

Settings

→

Network

→

–

Call History Timer—Tracks all calls you

have made and received since you last reset

this timer. To reset this timer to zero, press

Digital/Analog

2. Select an option and press

–

Automatic automatically switches the phone

between digital and analog.

to select Reset

–

All Calls Timer—Tracks all calls you have

made and received. This timer cannot be reset.

Analog only sets the phone to work in

analog mode only.

Kilobyte Counter—Tracks the kilobytes of

data sent and received by the phone. This

counter resets automatically. May not

appear on all phones.

Analog call forces a call into analog mode

for the duration of the next call.

Digital only sets the phone to work in digital

mode only.

Making and Answering Calls

Setting an alert for roaming

Setting Call Guard

You may use this setting if you want the phone to

alert you when you roam outside of your home

service area.

You can set the phone to warn you before you

answer or place a call while roaming.

•

Select Menu

→

Settings

Call prompt.

→

Convenience

→

1. Select Menu

→

Settings

→

Network

→

Call Guard

→

Roam/Svc Alert

–

The phone now emits a distinctive roam

ring to indicate when you are roaming

during calls.

2. Select an option and press

–

When no svc alerts you with three tones

decreasing in pitch when service is lost and

three tones increasing in pitch when service

is acquired again.

–

To accept or place a call while roaming, you

must press

Note: This functionality is disabled when the phone

is in emergency mode.

On roam change alerts you with two

decreasing tones when roaming service is

acquired and three increasing tones when

home area service is acquired again.

On any change alerts you with three

increasing tones if there is a change in

roaming service or three decreasing tones if

the phone loses service.

Setting the roam ringer

You can set a ringer to indicate when an incoming

call will be subject to roaming charges.

1. Select Menu

→

Settings

→

Sounds

→

Roam Ringer

2. Highlight Enabled to hear the ringer.

3. Press to set.

User Guide for the Kyocera Koi Phone

STORING CONTACTS

Use your phone’s Contacts directory to store

information about a person or company. Your phone

can hold, on average, about 500 phone numbers.

–

Time Pause stops dialing for two seconds,

then continues to dial.

Hard Pause stops dialing until you

select Release

Creating a new contact

1. From the home screen, enter the phone number

7. Select Save when done.

Adding a code or extension

you want to save, including the area code.

When you save the phone number of an automated

service, you may include a pause where your phone

would stop dialing; for example, where you would

wait to dial an extension.

Note: To save a contact without entering a

phone number, select Menu

Add New, select an option, and skip to step 3.

2. Select Save

→

Contacts

→

1. Enter the first portion of the phone number.

3. Enter a name for the contact. If you need to

2. Select Options

learn how to enter letters, see page 26.

3. Select a type of pause:

4. Press

down once to move to the

number field.

–

Time Pause

Hard Pause

5. Enter the contact’s information.

6. Select Options to add information to the contact.

4. Enter the remaining numbers.

–

Number Type to designate a number as

Work, Home, Mobile, Pager, or Fax.

5. Select Save and follow the prompts.

Editing or erasing a contact

To make changes to a contact, take these steps.

Add Speed Dial to assign a speed dial

number to your phone number.

Add Voice Dial allows you to add a voice tag

to your added phone number.

1. Select Menu

→

Contacts.

2. Select View All or Find Name to find the contact

Secret hides the number from view in the

contacts list and other areas of the phone.

you want to edit.

Primary Number assigns phone number as

primary number for contact.

Storing Contacts

3. Highlight the contact to edit and press

–

Edit Type—Assign a type: work

home,

mobile

pager, or fax. The type icon

4. Select Options

appears next to the phone number in

the Contacts list.

5. Highlight an option and press

to select it:

Unassign Ringer,

Unassign Picture, Edit Name,

Add To

Assign Ringer

–

Erase Number—Erase the number from

the contact.

Assign Picture

Erase Contact, or Classify Contact

Erase Voice Dial—Erase the voice dial

name associated with the number.

Editing a phone number

1. Select Menu

→

Contacts

–

Edit Number—Change the phone number.

2. Select View All or Find Name to find the contact

Edit Voice Dial—Record a new voice

you want to edit.

dial name.

3. Highlight the contact to edit and press

4. Press down to highlight the phone number

you want to edit.

–

Secret—Make the number secret so that it

will not appear on the screen until the lock

code is entered. Secret numbers can be

called without a lock code.

(For more information, see “Restricting

calls” on page 48.)

5. Select Options

6. Highlight an option for the phone number and

press

–

Primary Number—Make this number the

first one that shows up when you open

the contact.

–

Send Text Msg—Send a text message to the

phone number you selected.

Send Picture Msg—Send a picture message

to the phone number you selected.

Prepend—Move the cursor to the

beginning of the number so you can add the

area code.

View Number—See the phone number

you selected.

7. Enter the new information and follow

Add Voice Dial—Speak the name of the

contact person for this number so that you

can dial it using voice recognition (VR). For

more information, see page 51.

the prompts.

8. Select Save, if necessary.

–

Add Speed Dial—Assign or remove the

location you use to speed dial the number.

User Guide for the Kyocera Koi Phone

4. Scroll down until you find the name you want,

then press

Finding contact information

To find a phone number or contact, you can (1)

check the frequent contacts list, (2) search the

Contacts directory, or (3) use Fast Find.

–

To call the contact, highlight the number

and press

To display contact information, press

–

Checking the Frequent List

Setting Fast Find

With Fast Find, you press one or two keys to view

close matches of the number you are looking for.

Select Contacts to access all of your contacts in an

alphabetical list. the last 15 of your most frequently

called contacts (if you have enabled the Frequent

List setting). You also see the All Contacts list if you

scroll down past the double line.

•

From the home screen,

select Menu

→

Settings

→

Convenience

→

Fast Find

→

Enabled

To enable the Frequent List setting

•

elec

enu

→

Settings

→

Convenience

→

Using Fast Find

1. From the home screen, press the keys

Frequent List

→

Enabled

corresponding to the letters of the name you

want to find. A matching contact or speed dial

Searching the Contacts directory

1. Select Contacts for a list of all contacts.

entry appears. Press

matching entries.

down to scroll through

To quickly get down the list, enter the first letter

of the contact. The menu skips to that letter of

the alphabet.

-or-

2. Highlight the name you want, then press

to call the number.

2. Select Menu

→

Contacts.

3. Select a search method:

–

View All—List all saved contacts.

Find Name—Locate a specific name. Enter

part of the contact name, then select Find

–

Speed Dial List, Voice Dial List, Business

List, or Personal List—Select a contact

from a list.

Storing Contacts

USING THE CAMERA

Tips before operating your

camera

Setting up the camera for photos

1. With the swivel open, select Menu

2. Select Options

→

Camera.

•

You cannot activate the camera while on an active

call or while browsing files in the media gallery.

3. Scroll left or right on the horizontal menu bar

using

•

The lens cover must be open before you can

take a picture.

4. Select Settings

Note: When the phone is powered on and in an

idle state, opening the lens cover causes the

phone to automatically go into camera mode.

5. Scroll down to highlight an option and press

–

Flash On, Off, or Automatic.

Resolution options are 1280 x 960 (best for

printing), 640 x 480, 352 x 288, 320 x 240

(best for sending to email and viewing),

176 x 144, 160 x 120.

•

Once the camera is active, the home screen acts

as the viewfinder.

If you get a “Low memory” error on your

phone’s screen, check your resolution and

quality compression settings. See “Setting up

the camera” on this page.

–

Low Light Mode brightens the picture for

low light environments.

Self Timer options are Off (default) or 3, 5,

or 10 second pauses. When set, the camera

beeps tones from 3 seconds down to the

time the shutter snaps the picture

•

If there is no activity within approximately

45 seconds after you turn your camera on, then

the camera quits and returns to the previous

launch point.

automatically. Self Timer is not available

when Multishot mode is activated.

Menu settings and options can only be accessed

when the camera is active.

–

Multishot options are On or Off (default).

When set to On, the camera allows you to

take multiple pictures (up to six) while the

camera key is pressed and held. A tone will

play each time a picture is taken. A second

tone will play when the final picture is taken.

Shutter Sound sets the sound used when the

shutter closes while taking a picture.

User Guide for the Kyocera Koi Phone

–

White Balance allows the camera to adjust

to whites. Useful feature for optimizing

picture taking in different light situations.

Options are Automatic, Fluorescent,

Incandescent, or Daylight.

Menu options for camera mode

1. Select Menu

→

Camera.

2. Select Options

3. Scroll left or right on the horizontal menu bar

using to scroll through the options:

Quality sets the picture compression. The

higher the compression, the better the detail

of the picture (higher pixel rate). Options

are Low, Medium, or High (default). When

set to High, the picture file size is larger,

using more memory.

•

Last shows the most recent picture taken.

Video Mode toggles between video and

camera modes.

•

Camera Pictures displays all pictures taken

and stored.

–

LED flashes a light to indicate a picture has

been taken. Options are On (default) and Off.

Settings displays available camera settings you

may set up prior to taking a picture.

Cancel is available only when the swivel is

closed and dismisses menu options.

Restoring camera menu settings

The following settings revert to the default setting

each time you enter and exit the camera application:

Quit is available only when the swivel is

closed and dismisses returns to previous

screen display.

Zoom, Brightness, Contrast, Camera, MultiShot,

Color tone, Frames, Self Timer, and Picture Layout.

•

Brightness allows you to adjust the brightness

of the image in the home screen LCD.

The following settings remain at the setting

you selected each time you enter and exit the

camera application:

Contrast allows you to adjust the contrast of the

image in the home screen LCD.

White Balance, Flash, Resolution, Quality, Shutter

Sound, and LED.

Frames allows you to add a frame or a stamp to

your picture. A frame or stamp cannot be

removed once it has been used in a picture.

Note: The picture resolution changes to 176 x

144 while taking pictures with frames. The

resolution returns to original setting once

frames is disabled.

Using the Camera

2. Focus on the image using the phone’s display as

Camera mode indicators and icons

The camera mode displays the following onscreen

indicators and icons:

a viewfinder.

Tip: Press

or up or down to zoom in or

zoom out.

Icon

Description

3. Take the picture using one of three methods:

Flash on

–

Press in

Press

Camera mode

Video mode

Press

The image is immediately saved to

Top right hand

Number of snapshots

Media Gallery

corner numbers. remaining

4. Press

to return to the viewfinder and take

more pictures.

Zoom level

5. Press

when finished taking pictures.

Bottom left hand

numbers

Resolution setting

Tip: Closing the shutter cover on the back of

the phone will exit the camera mode.

Multishot

Swivel closed

1. Press in and scroll to Camera

Self Timer (when camera/

capture key is pressed, the

icon switches to a number

and begins counting down)

Tip: Slide the shutter cover on the back of the

phone open. This automatically turns the

camera on if the phone is already powered on

and in an idle state.

Taking a picture

Swivel open

2. Press in again.

–

A vertical row of options appears on the left

of the screen: Quit, Brightness, Contrast,

Frames, Last, Video Mode, Camera Pictures,

Settings, and Cancel.

1. Select Menu

→

Camera.

Tip: Slide the shutter cover on the back of the

phone open. This automatically turns the

camera on if the phone is already powered on

and in an idle state.

3. Focus on the subject you want to capture, using

to zoom in or out.

User Guide for the Kyocera Koi Phone

Swivel open

Key

4. Press . The picture is taken and saved.

5. Press to return to options.

Camera

Menu Screen

Take picture

Dismiss menu

options

6. Select Quit when finished taking pictures.

Select Capture to Select OK.

take picture

Sending a picture

If your service provider supports picture messaging

you can send pictures through text messaging.

Select Options

Cancel,

dismisses menu

Note: Swivel must be open to send pictures.

Zoom in

Scroll menu

options right

1. Take the picture.

2. Select Send. This launches the multimedia

Down

Zoom out

Scrolls menu

options left

messaging application.

3. Write your message. See “Creating a text

Takes picture

Zoom in

Select menu

option

message” on page 32.

Select menu

option

Camera key map

Swivel closed

Scrolls menu

options right

Key

Camera

Menu Screen

Down

Zoom out

Scrolls menu

options left

Take picture

Dismiss menu options

Display menu

Select menu options

Scroll menus left

Down Zoom out

Up Zoom in

Scroll menus right

Using the Camera

Setting up the video camera

Menu options for video mode

Menu settings can only be accessed when the

camera is in an active mode.

1. With the swivel open, select Menu

2. Press to select Options

3. Scroll left or right on the horizontal menu bar

using . Highlight and select Video Mode

4. Select Options

→

Camera.

1. Select Menu

2. Press to select Options

3. Scroll left or right on the horizontal menu bar

using

4. Highlight Video Mode, and press

5. Select Options

→

Camera.

5. Scroll left or right on the horizontal menu bar

using to choose an option:

–

Last plays the most recent video taken.

6. Scroll left or right on the horizontal menu bar

using

Camera Mode toggles between video and

camera modes.

7. Highlight Settings and press

–

Video Album displays all videos taken

and stored.

8. Highlight an option and press

Settings allows you to change your camera

settings. See “Setting up the camera for

photos” on page 19.

–

White Balance allows the camera to adjust

to whites. Options are Automatic,

Fluorescent, Incandescent, or Daylight.

–

Cancel is available only when the swivel is

closed and dismisses menu options.

–

Quality sets the video compression. The

higher the compression, the better the detail

of the video. Options are Low, Medium, or

High (default). When set to High, the video

file size is larger, using more memory.

Brightness allows you to adjust the

brightness of the image in the home

screen LCD.

–

LED lights and stays steady during video

–

Contrast allows you to adjust the contrast of

recording. Options are On (default) and Off.

the image in the home screen LCD.

Recording a video

When you begin recording a tone sounds, the video

record icon blinks, and a “Recording” indicator

with a timer progress bar displays. A tone sounds

when the video stops recording.

User Guide for the Kyocera Koi Phone

Swivel open

Swivel closed

1. Select Menu

→

Camera

1. Press in and scroll to Camera.

Tip: Slide the shutter cover on the back of the

phone open. This automatically turns the

camera on if the phone is already powered on

and in an idle state.

Tip: Slide the shutter cover on the back of the

phone open. This automatically turns the

camera on if the phone is already powered on

and in an idle state.

2. Press

3. Scroll left or right on the horizontal menu bar

using to select the Video Mode option.

4. Focus on the image and press

to select Options

2. Press in again.

–

A vertical row of options is on the left of the

screen: Quit, Brightness, Contrast, Frames,

Last, Video Mode, Camera Pictures,

Settings, and Cancel.

select Record

3. Press up or down and highlight

Tip: Press

or zoom out.

or up or down to zoom in

Video Mode

4. Press in again.

5. If you want to pause the recording, press

select Pause. To continue recording, press

5. Focus on the subject you want to video.

to select Resume

6. When finished recording, press

select Stop

7. The recorded video is immediately saved to

6. Press . Recording continues until you press

a second time, or when the recording timer ends.

7. The recorded video is immediately saved to

Media Gallery

→

Videos

→

Video Album.

Media Gallery

→

Videos

→

Video Album.

8. Press to return to the vertical row of options.

8. Press the Back or End key when finished taking

videos. This will take you back to the main

menu screen.

Select Quit when finished taking videos.

Using the Camera

Video key map

Swivel closed

Key

Video Camera

Menu Function

1st press – start recording (plays a tone)

2nd press – stops recording (plays a tone)

Before recording: displays menu

During recording:

Dismiss menu options

Select menu option

1st press – pause

2nd press – selects option

Zoom out

Scroll menu option left

Scroll menu option right

Down

Zoom in

Swivel open

Key

Video Camera Function

Menu Function

1st press – start recording toggle

Dismisses menu options

2nd press – stops recording toggle

“Record” – starts recording toggle

“Stop” – stops recording toggle

“OK” – selects option

“Options” – while not recording

“Cancel” – dismisses menu

Dismisses menu options

“Pause/Resume” – pauses and resumes recording toggle

When not recording, goes back to the last function.

While recording, stops recording.

Exit to idle when not recording

Zoom in

Exit to idle

Down

Scrolls menu options left

Zoom out

Zoom in

Scrolls menu options right

Scrolls menu options left

Down

Zoom out

User Guide for the Kyocera Koi Phone

ENTERING TEXT, NUMBERS, AND SYMBOLS

You can enter letters, numbers, and symbols in

contacts, text messages, and your banner.

Entering numbers

•

To enter a number while in

mode, press a

or mode,

number key once.

Understanding text entry screens

The current text entry mode (and capitalization

setting, when applicable) are indicated by icons.

•

To enter a number while in

press and hold a number key until the number

appears on the screen.

capitalization setting

Entering words letter by letter

Use normal alpha to enter letters.

text entry mode

1. Press a key once for the first letter, twice for the

second letter, and so on. If your phone is set to

Spanish, French, or Portuguese, accented

letters are available.

text entry

field

2. Wait for the cursor to move right and enter the

next letter.

Text entry modes

There are five text entry modes:

Case change

Entering words quickly

When you press a series of keys using

mode,

checks its dictionary of common words and

guesses at the word you are trying to spell.

Numbers only

Normal alpha

1. For each letter of the word you want, press the

Rapid Entry

key once. For example, to enter the word “any”

Add Symbol

press:

→

Note: The mode you start in depends on the task

you are doing. For example, when entering a phone

number, you’re in number mode. When entering a

name for a contact, you’re in normal text mode.

2. If the word doesn’t match what you want, press

to look at other word matches.

3. When you see the word you want, press

Entering Text, Numbers, and Symbols

Entering symbols

Changing modes

While entering text, you can enter symbols by

Sometimes you need to change modes. For

pressing

until you see the symbol you

example, to enter numbers in an email address

want. Using this method, you have access to the

following symbols:

while in

mode, you must change to

mode, enter the numbers, and then change

back to

mode to complete the address.

& @ ,

‘

To change text entry modes, you can either:

To access the full set of symbols:

•

Press and hold

you want appears.

until icon for the mode

1. Press

2. Select

3. Press

to select Options.

Add Symbol

-or-

down to view the list of symbols.

•

Select Options, then the mode.

4. Press the number key corresponding to the

symbol you want.

Capitalization settings

You can change capitalization at any time while

Switching default text entry modes

You can change the default text entry mode when

creating a text message. This setting applies only to

the message body screen, not the “To” screen.

entering text. Simply press

to choose upper

or lower case while in Normal Alpha mode.

1. Select Menu

→

Messages

→

Msg Settings

→

Default Text

2. Select Normal Alpha or Rapid Mode

User Guide for the Kyocera Koi Phone

Quick reference to text entry

This table gives general instructions for entering letters, numbers, and symbols.

To...

Do this...

Enter a letter

Use

mode and press a key until you see the letter you

want. For more information, see page 26.

Use mode and press a key once to enter its number.

For more options, see page 26.

Use mode and press

you want. See page 27.

Enter a number

Enter a symbol

until you find the symbol

Enter a space

Press

Erase a character

Erase all characters

Press and hold

Move the cursor right or left

Move the cursor up or down

Change text entry modes

Capitalize any letter

Press

right or left.

up or down.

Press and hold

mode, press

. Choose

Lowercase any letter

. Choose

Select soft options on the screen

Press the appropriate key,

Entering Text, Numbers, and Symbols

USING MEDIA GALLERY

The media gallery stores all the files in the phone

and displays files.

3. Highlight a picture and select Options. The

following options are available to you:

–

Send allows you to send the picture to

another phone or email address.

Accessing files

1. Select Menu

→

Media Gallery.

–

Take Picture to snap another photo.

2. Select an option:

Erase the image.

–

Camera Pictures displays your photos taken

in a table/thumbnail view. The photos

display in chronological order with the

newest one first (top left corner). The file

name also displays.

Assign picture as a Caller ID or

as wallpaper.

–

Rename the photo.

Details of the file.

Erase All a picture by rotating or resizing.

–

Images displays a list of categories that

contain preloaded, downloaded, saved, or

created files such as wallpaper, screen

savers, or caller IDs.

Modifying pictures

You can modify a picture by rotating, resizing, or

changing the brightness, sharpness, saturation,

hue, auto adjust and/or color tone.

–

Sounds displays a list of categories that

contain saved or downloaded sounds such

as ringers and voice memos.

1. Select Menu

→

Media Gallery

→

Camera Pictures

Videos displays a list view of the file names

2. Press

of videos that you recorded.

3. Use

to highlight a picture.

4. Press

or select View.

Browsing pictures

5. Select Options

1. Select Menu

→

Media Gallery

→

Camera Pictures

6. Select Modify

2. Press

to select View, or press

User Guide for the Kyocera Koi Phone

7. Select Options. The following options are

–

Screen Savers displays

available screensavers.

available to you:

Caller IDs displays pictures and images

saved and the text IDs you assigned them.

–

Rotate options are 90 degrees right, 180

degrees, 90 degrees left, Flip horizontal,

or Flip vertical.

Resize will decrease the photo or image

resolution by 90%, 75%, 50%, or 35%.

This will create more memory space.

Doodles displays files created with Doodler.

3. Select Open to display the files in that menu.

4. Select Options. Choose from the

following options:

Brightness, Sharpness, Saturation, and Hue

–

Send launches the messaging application so

you can share the image.

display bar is shown and can be increased by

pressing

left.

right, or decreased by pressing

–

Erase the image (image must not be locked).

Assign the image to Caller ID, Wallpaper, or

Screen Saver.

–

Auto Adjust allows you to brighten dark

photos or darken bright photos.

–

Send To Online uploads an image to a

server (not available on all phones, check

with your service provider).

Color Tone options are Grayscale, Negative,

Sepia, and Emboss. When chosen, the

camera allows you to modify the color tone

of a photo.

–

Rename the image.

Details gives you the file size of the image.

8. Select Save when done modifying. From the

Save Changes menu, choose Save (saves your

original file with modifications), or Save as new

(creates a modified file from your original).

Erase All erases all images stored (images

must not be locked).

5. Select Close or press

when done.

Browsing images

Browsing sounds

The images menu allows you to assign your files to

various applications.

1. Select Menu

→

Media Gallery

→

Sounds.

2. Use

to highlight the menu item you want:

1. Select Menu

→

Media Gallery

→

Images.

–

Saved Sounds contains sounds saved on

2. Use

to highlight the menu item you want:

Saved Images displays available images.

Wallpapers displays wallpaper selections.

your phone.

–

Ringers contains ringers saved on your phone.

Voice Memos contains voice memos you

made to yourself.

Using Media Gallery

3. Select Open to display the files in that menu.

–

Record New allows you to record new videos.

4. Select Options. Choose from the

Erase the videos.

following options:

Send to Online uploads a video to a

server (not available on all phones, check

with your service provider).

–

Erase the sounds.

Send To Online uploads a sound to a server

(not available on all phones, check with

your service provider).

–

Rename allows you to rename the video file.

Details gives you the file size of the video.

Erase All erases all videos stored.

–

Set As Default sets the sound as default.

Details gives you the file size of the sound.

Erase All erases all sounds stored.

6. Select Close when done.

Creating free space

5. Select Close when done.

If your phone does not have enough memory to

store a file, a dialog displays and asks you if you

want to create space.

Browsing videos

1. Select Menu

→

Media Gallery

→

Videos.

•

Select Yes to display the file browser

(categories) with the memory needed and

available memory.

2. Use

to highlight the menu item you want:

–

Video Album contains videos taken with

your camera.

•

Select No to return to the previous screen and

–

Saved Videos contains videos that

no files are saved or downloaded.

were downloaded.

The actions are limited to the following:

3. Select Open to display the files in that menu.

–

Erase the selected file

4. Select Play to review a video on the camera’s

(you cannot erase locked files).

screen. Use

to highlight Play

, Stop

–

Done re-attempts the download or save.

, Rotate Left , or Rotate Right

–or–

5. Select Options. Choose from the

following options:

–

Send launches the messaging application so

you can share the videos.

User Guide for the Kyocera Koi Phone

SENDING AND RECEIVING TEXT MESSAGES

This chapter describes how to send, receive, and

erase text messages from your phone.

3. To add another recipient to this message,

choose a method:

– Press

to select Options. Then select

Important: The features and menus described in

this chapter may vary depending on services

available in your area. In addition, usage charges

may apply to each message. For details, check with

your service provider.

Recent List Contacts List, or Group Lists.

– Enter a space or comma after the first number.

Then enter another recipient manually.

Note: You can send a message to up to 10

contacts at once. The messages will be sent one

at a time, once to each addressee.

Sending text messages

You can only send text messages to phones that are

capable of receiving them, or to email addresses.

4. Select Next.

5. Enter the message.

Text messages have a predetermined character

limit. When you reach the character limit for a

single message the phone beeps and asks you to

edit the message to meet the size limitation. Note

that signatures you create and assign count as

characters in your messages.

6. Select Options

→

Insert. Press

to add

prewritten text:

–

Insert QuickText—Select a prewritten

message. Highlight one from the list and

press

7. When you have completed the message, you can

Creating a text message

send it immediately or set sending options. To

send it immediately, press

to select Send. See

To send a text message to a single recipient:

the following procedure to set sending options.

1. Select Menu

→

Messages

→

New Text Msg.

2. Select an address to enter the recipient’s phone

Setting sending options

When you are ready to send a message, you have

several options for how and when you want the

message to be received.

number or email address:

– Select a saved number from the Recent List

or Contacts List, or select a Group Lists you

have created.

1. Once you have completed the message, press

– Enter a New Address manually.

(To learn how to enter text, see page 26.)

to select Options

2. Scroll down to select:

Sending and Receiving Text Messages

–

Add Address—Return to the “To” screen to

add another recipient without losing the

message text. Enter the new address, then

select Next to return to message entry screen.

Adding a signature

The signature you create does not display in the

message creation screen; however, the signature is

included at the end of all outgoing messages and is

counted as characters in your messages. To create

a signature:

Save Message—Save the message in

your Drafts folder. This prevents the message

from being deleted if you have activated

AutoErase, and enables you to send the

message to others.

1. Select Menu

→

Settings

→

Messaging

→

Signature

2. Enter your signature in the text field.

–

Save Quick Text—Save the message you have

just entered as a prewritten message, then

return to the message entry screen so you

can send the message.

3. Select OK to save the setting.

If you cannot send messages

You may not be able to send or receive messages if

your phone’s memory is nearly full, or if digital

service is not available at the time. To free up

memory, erase old messages. See “Erasing

messages” on page 36.

Settings — Highlight Settings. Press

Choose from the following:

•

Msg Receipt—Request notification when

the message has been received.

Set Priority—Label the message

as “Urgent.”

Understanding appended messages

Callback Number—Include a callback

number with the message to let the

recipient know at what number they can

call you back. Select Yes to include your

own number, or Edit to enter a different

callback number.

text entry field

characters remaining

If you go over the character limit for a single

message, the phone may automatically append an

empty segment to your message to make space.

•

Send Later—Schedule when to send

the message.

3. When you have finished setting options, press

Important: You will be charged for each

message segment.

to return to the message window.

4. Press

to select Send.

User Guide for the Kyocera Koi Phone

When you start a message, the maximum character

limit (“169” in the example) appears below the

text entry screen. This number counts down as you

enter characters, until it reaches 0. If you continue

to enter text after this counter reaches 0, a message

segment may be appended.

To view the OutBox

1. Select Menu Messages

2. Press

→

OutBox.

up or down through the list of

messages. One of the following symbols

appears next to each message:

The message is pending and will be sent

when possible. You can cancel delivery

of the message.

Receiving incoming calls while

creating messages

•

If you don’t wish to answer the call, select Ignore

To answer the call, press . Your message

is saved to the Saved folder. To return to the

message, select Menu

and select Resume

The scheduled message will be sent at

the scheduled time. You cannot cancel

delivery of the message.

•

→

Messages

→

Drafts

The message cannot be sent because

service is not available.

Viewing the OutBox

You can check the status of messages you have sent

as long as they have been saved to the OutBox.

The scheduled message has been sent

and will be delivered as scheduled. You

cannot cancel delivery of the message.

The message has been received by the

recipient you specified.

To set the Outbox

The Outbox default is set to disabled to conserve

memory. If you want to save your sent messages:

The message has been received and

opened by the recipient you specified.

(This symbol may not be available.

Check with your service provider.)

1. Select Menu

→

Messages

→

Msg Settings

→

Save to Outbox

– S electEnabled to save all sent messages to

the Outbox.

The message has been sent to more

than one recipient.

– S electPrompt to alert you to choose whether

or not to save your message.

The message has never been sent, or has

not been sent since it was last modified.

You can cancel delivery of the message.

Sending and Receiving Text Messages

Retrieving text messages

If you see the

symbol

When a text message is received, your screen

displays “New Messages”, along with the

symbol at the top of your screen. The symbol

flashes if the message is urgent.

If the

symbol is flashing, the message is urgent.

1. Select Menu

→

Messages

→

InBox.

A list of all your received messages appears.

New, unread messages appear in bold

If your phone is set to Automatic Mode, the body

of the message will appear on the phone

screen automatically.

indicates an “Urgent” message.

2. Press

of messages.

3. Press

up or down to scroll through the list

To activate Direct View,

select Menu

Automatic Mode Enabled

→

Messages

→

Msg Settings

→

in to read a message.

Reading the message

The options available to you may vary. Check with

your service provider.

If you see the “New Messages” note

You can choose to:

•

View the message

—

Press

Note: Sounds embedded in text messages will not

play if the phone is set to Silent mode.

Ignore the message

—

If you see the body of the message

The body of an incoming message will appear on your

home screen only if your phone is set to Direct View.

1. If the text message is long, press

down to

view the entire message.

2. When you are finished, you can Reply to the

sender, Play the sound embedded in the

message, Erase the message, Save the message

to your Saved folder, or set additional Options

for the message:

You can choose to:

•

Ignore the message

—

Press

Read the message. See “Reading the message”.

Note: If you receive a new message while you are

reading a message, the one you are reading will be

replaced by the new one. You can find the older

message in the InBox:

– View Sender information.

–

Forward the message.

Reply with Copy to reply to the message with

Select Menu

→

Messages

→

InBox.

a copy of the original attached.

User Guide for the Kyocera Koi Phone

–

Save Object(s), such as sound or pictures,

from the message. (This option is available if

the incoming message includes a graphic

or sound.)

Erasing single messages

1. Select Menu

2. Press

want to erase: InBox

3. Press

4. Highlight the message to erase and press

→

Messages.

down to the type of text message you

OutBox, or Saved.

Save Contact to save the sender’s phone

number or email address in your Contacts

list. (This option is available if a vCard is

included in the message.)

5. Select Erase to erase the message. A notification

appears: “Erase this message?”

Save as AutoText to save the text from the

message as AutoText, which you can insert

into other messages. Graphics and sound will

not be saved as part of AutoText.(For more

about AutoText, see page 37.)

6. Select Yes to erase the message.

Note: You can erase a scheduled message from

the OutBox, but you cannot cancel delivery of

the message.

3. Select Done

Erasing all messages

Note: The

symbol indicates that a graphic did

1. Select Menu

→

Messages

→

Erase Messages.

not come through. It may be too large or

incorrectly formatted.

2. Select a folder to erase all messages from:

InBox OutBox, Saved Folder, or Drafts

Folder. To erase messages from all folders,

Setting message alerts

select All Messages

You can set your phone to alert you of incoming

text messages or pages. For more information, see

“Setting message alerts” on page 44.

3. A message appears: “Erase all messages?”

Select Yes to erase messages or No to cancel.

Erasing messages automatically

Use this setting to have old messages automatically

erased from the InBox when memory is low.

Erasing messages

It is a good idea to erase old messages, as messages

take up memory in your phone.

1. Select Menu

→

Messages

→

You have the option of erasing text messages and

pages as you send or read them, erasing them one

at a time from the list in the OutBox or InBox, or

erasing them all at once.

Msg Settings

→

Auto-Erase.

Sending and Receiving Text Messages

2. Highlight Old InBox Msgs and press . Older

messages will now be erased as new messages

are received.

5. To enter the next address, enter a space or

comma after the first number or email address.

(If you insert a saved contact or a number

from the Recent List, the phone will insert the

comma automatically.)

•

To disable this setting:

Select Menu

→

Messages

Disabled.

→

Msg Settings

→

Auto-Erase

→

6. Select Options to select the next number.

7. Select Recent List or Contacts

Customizing message settings

To make messaging easier, you can customize

settings for sending and receiving messages.

8. When finished, select Done

9. To send a message to your new group, see

“Sending text messages” on page 32.

Creating group lists

You can create and save a list of multiple recipients.

Your Koi phone stores five group lists with up to 10

recipients per list.

Creating and editing prewritten

messages (QuickText)

Your phone comes with prewritten (QuickText)

messages, such as “Please call me,” which you can

insert into the body of a text message. You can edit

these messages and create new ones. Your phone

will store up to 40 QuickText messages, with up to

100 characters per message.

1. Select Menu

→

Messages

→

Group Lists

→

Create New

2. Enter a name for the list. For help entering text,

see page 26.

3. Press

to select Next.

1. Select Menu

→

Messages

→

Msg Settings

→

Edit QuickText

4. To enter the first phone number or email

address, select an option:

2. To create a new pre-written message, press

to select New Msg

–

Recent List to select numbers from your

Recent List.

-or-

New Address to enter the phone number or

email address manually.

To edit an existing pre-written message,

highlight the message and press

Contacts List to select numbers from your

phone book.

3. Enter or edit the text and press

to select

Done. For help entering text, see page 26.

Note: You can also save an incoming message

as AutoText. For directions, see page 36.

User Guide for the Kyocera Koi Phone

SENDING AND RECEIVING MULTIMEDIA MESSAGES

4. Press

Subject: field. Choose a method:

– Enter the subject text manually, or

down once to enter a message in the

Sending multimedia messages

You can only send multimedia messages to

phones that are capable of receiving them, or to

email addresses. For details, check with your

service provider.

– Press

5. Press

to select Options.

down once or select Next to enter a

Multimedia messages have a predetermined

character and file size limit. When you reach the

character and file size limit for a single multimedia

message, you must edit the multimedia message to

meet the size limitation.

text message in the Text: field.

6. To enter a text message in the Text: field.

Choose a method:

7. Press

down once to enter the

Picture/Video: field.

Note: Multimedia message file size limits may

apply. For details, check with your service provider.

Note: You may add only one picture or one

video per multimedia message sent.

8. Press

to select Options. Select an option:

Creating a multimedia message

•

Take Picture to instantly take a new photo and

attach it to your message.

1. Select Menu

→

Messages

→

New Picture Msg.

2. Enter the recipient’s phone number or email

Record Video to instantly record a new video

and attach it to your message.

address in the To: field.

3. To add additional recipients:

Media Gallery to access all picture and video

– Enter a space or comma after the first phone

number or email address, then enter another

recipient manually, or

files in the phone:

–

Camera Pictures displays your photos taken

in a table/thumbnail view.

– Press

to select Options. Then select

• Highlight a photo to add to the multimedia

Contacts or Group Lists

message. Press

to choose Select.

Note: You can send one multimedia message to

a maximum of 10 contacts.

–

Videos displays a list view of the file names of

videos that you recorded.

Sending and Receiving Multimedia Messages

•Highlight Video Album

to select Open.

•Highlight a recorded video to add to the

–

Message Priority allows you to send

your multimedia message with Normal or

Urgent priority.

Press

multimedia message. Press

11. Press

to select Send. This will send your

choose Select.

multimedia message.

9. Press

and press

down once to enter the Sound: field

Receiving multimedia messages

to select Options. Choose:

There are two settings for receiving a multimedia

message on your Koi phone: Auto Receive (default)

and Prompt.

Note: You may add only one new or stored

sound per multimedia message sent.

•

Record Sound to instantly record a new sound

and attach it to your message.

Auto receive mode

When a multimedia message is received it is

automatically downloaded onto your phone.

Media Gallery to display a list of categories

that contain saved or downloaded sounds and

voice memos.

The alert “New Message(s)” appears along with the

text “Message Received. View now?”

– Highlight Saved Sounds

to select Open.

– Highlight a sound to add to the multimedia

message. Press

Press

•

To View the multimedia message, press

To view Later, press

to choose Select.

Note: If a multimedia message is received during a

call, then the phone downloads the message

approximately one minute after the last key is pressed.

10. Before sending your message, press

select additional Options. Choose:

–

Preview Message plays your multimedia

message prior to sending.

Prompt mode

When a multimedia message is received, your

screen displays the alert “New Message(s)” along

with the question “Retrieve Now?”

–

Save Message allows you to save your

multimedia message to the Drafts Folder and

send it later.

–

Add Address allows you to add additional

addresses to your multimedia message prior

to sending it.

•

To View the multimedia message, press

Select Erase to never download the

multimedia message.

•

To view Later, press

User Guide for the Kyocera Koi Phone

Note: If a multimedia message is received during a

call, then the phone screen displays the alert “New

Message(s)” after the call ends.

–

Replay plays the multimedia message again

from the beginning.

Erase Msg allows you to delete the currently

displayed multimedia message.

To activate Prompt mode:

–

Done exits the multimedia message.

1. Select Menu

2. Press

3. Highlight Auto Receive Mode and press

4. Press

highlight Disabled. Press

→

Messages

→

Msg Settings.

Call initiates call to sender of

multimedia message.

up or down to scroll through the list.

–

Save Picture saves the currently

viewed picture embedded in the

multimedia message.

up or down through the list and

–

Save Video saves the video embedded in the

multimedia message.

Viewing multimedia messages

When you receive a multimedia message, a

Save Sound saves the current sound

embedded in the multimedia message.

appears on your phone’s screen and remains until

all messages are viewed. The message is stored in

the InBox until the full message has been received,

regardless of the auto receive or prompt setting.

Save Address extracts email addresses,

phone numbers, and/or URLs from the

sender info and multimedia message body.

1. Press

the message is long, press

entire multimedia message.

2. Press to select Options. Press

to highlight additional options for the

multimedia message:

to View the multimedia message. If

down to view the

–

Save as QuickText saves the text in the

multimedia message to the QuickText list.

down

Save Message saves the multimedia message

to the Saved Folder on the phone.

Forward launches the message creation

screen, allowing you to forward the

multimedia message. The original address

will not be shown, nor will the graphic,

sound, and text fields.

Note: The options available to you may vary.

Check with your service provider.

–

Message Info displays multimedia message

information (priority, sender, subject, time

sent and received, and message size).

3. When you are finished viewing the multimedia

message, select Reply or press

–

Play Video plays the video in the

multimedia message.

Sending and Receiving Multimedia Messages

CUSTOMIZING YOUR PHONE

The contents of the Settings menu are as follows.

Silent Mode

Vibrate Only

Display

My Banner

Voice Features

Add Voice Dial

Network

Data/Fax Calls

Vibe then Ring

Lights Only

Normal Sounds

Main Menu View

Color Themes

Wallpaper

Screen Saver

Backlighting

Auto-Hyphen

Language

Time/Date Format

Contrast

Brightness

Delete Voice Dial

Voice Training

Voice Wake-Up

Voice Answer

Expert Mode

Privacy Alert*

Set Phone Line*

Roam/Svc Alert

Roam Option

Digital/Analog

Location

Sounds

Ringer Volume

Ringer Type

Messaging

Alerts

Signature

Edit QuickText

Auto Retrieve

Callback Number

Msg Receipt

Save to OutBox

Auto-Erase

Business Ringer

Personal Ringer

Roam Ringer

Swivel Open

Swivel Close

Pwr On/Off Sound

Key Volume

Accessories

Pwr Backlighting

Headset Ringing

Auto-Answer

Com Port Speed

TTY Device

Convenience

Swivel Answer

Swivel End

Fast Find

Key Length

Missed Call Alert

Smart Sound

Frequent List

Hold Call

Default Text

Voicemail Number

Minute Alert

Earpiece Volume

Spkrphone Volume

1-Touch Dialing

Web Prompt

Call Guard

Security

Lock Phone

Limit Calls

New Lock Code

Delete Contacts

Emergency Numbers

*Not available on all phones. Check with your service provider.

User Guide for the Kyocera Koi Phone

Turning sounds back on

To restore all sounds to the phone:

Silencing all sounds

Your phone is set to make sounds when you receive

calls, press keys, navigate through menus, and

receive alerts (such as new messages).

•

With swivel closed, press in once.

With swivel open, press and hold

You can silence all sounds and set the phone to

vibrate or light up when you receive calls and alerts.

Choosing ringers

Your Kyocera Koi phone has 25 ringers you can

choose to use for incoming calls.

Setting the phone to vibrate or light up

1. Select Menu

→

Settings

→

Silent Mode.

1. Select Menu

→

Settings

→

Sounds

→

Ringer Type

2. Choose an option and press

2. Scroll down the list to hear the different rings.

3. Press to select a ringer from the list.

–

Vibrate Only—Causes the phone to vibrate

for the duration of the incoming call or other

alert. appears.

Note: Downloaded ringers are added to the end of

the standard list of 25 ringers.

Vibrate then Ring—Causes the phone to

vibrate for the first 10 seconds and then ring

for the remainder of the incoming call alert.

appears.

Assigning business and

personal ringers

You can assign ringers to contacts classified as

business or personal in your Contacts directory.

–

Lights Only—Causes the phone to light up

for the duration of the incoming call or other

alert. appears.

Normal Sounds—Causes the phone to ring

for the incoming call or alert (in effect,

returns phone to a non-silent mode).

Note: To classify a contact as Business or Personal,

see page 16.

1. Select Menu

→

Settings

→

Sounds.

2. Ηighlight Business Ringer or Personal Ringer

3. Press

to return to the home screen.

and press

Note: The phone will ring when it is attached to an

external power source (such as a charger), even if

all sounds have been silenced.

3. Select a ringer and press

Assigning a ringer to a contact

1. Select Menu View All.

→

Contacts

→

Shortcut to Vibrate Only mode

2. Select the contact to assign a ringer to.

•

With swivel closed, press in twice.

3. Select Options

→

Assign Ringer.

•

With swivel open, press and hold

4. Highlight the ringer you want and press

Customizing Your Phone

Importing ringers

You can download additional ringers to your phone

using the Kyocera Phone Desktop software (sold

separately). To purchase this software and other

Adjusting volume

You can adjust the earpiece, speakerphone, and

ringer volume as well as key tones.

Adjusting the earpiece volume

To adjust the earpiece volume manually during a

call, press up or down.

accessories, visit www.kyocera-wireless.com/store

Setting sounds for your phone

You can set your phone to sound tones when you

open and close the swivel, and when you turn the

phone on and off. Sounds will not occur during an

incoming call, if you are in a call, or if a headset or

car kit is attached to your phone.

To set the earpiece volume:

1. Select Menu

→

Settings

→

Sounds

→

Earpiece Volume

2. Press

decrease the volume.

3. Press to select Save

right to increase the volume, or left to

Set sound when swivel opens

1. Select Menu

→

Settings

→

Sounds

→

Adjusting the ringer volume

1. Select Menu

Swivel Open.

→

Settings

→

Sounds

→

2. Scroll through the list to hear the sounds.

3. Select a sound and press to save.

Ringer Volume

2. Press

decrease the volume.

3. Press to select Save

right to increase the volume, or left to

Set sound when swivel closes

1. Select Menu

→

Settings

→

Sounds

→

Swivel Close.

Adjusting speakerphone volume

1. Select Menu →

2. Scroll through the list to hear the sounds.

3. Select a sound and press to save.

→

Settings

→

Sounds

Spkrphone Volume

2. Press

decrease the volume.

3. Press to select Save

right to increase the volume, or left to

Set sound when phone powers on or off

1. Select Menu

→

Settings

→

Sounds

→

Pwr On/Off Sound.

2. Select Enabled. To deselect this sound,

select Disabled

User Guide for the Kyocera Koi Phone

–

Vibrate & Remind, Beep & Remind, FWY! &

Adjusting key tone volume

Remind, Game! & Remind, Bloop! & Remind,

Winner! & Remind, Zilofon! & Remind sets the

phone to notify you once when a new

message is received and then notify you again

every five minutes. To stop a reminder alert,

You can change the volume of the tones the phone

makes when you press the keys.

1. Select Menu

→

Settings

→

Sounds

→

Key Volume

2. Press

decrease the volume.

3. Press to select Save

right to increase the volume, or left to

press

to select Ignore.

Disabled—Turn off message alerts.

Using shortcuts

Setting key length

You can change duration of the tones the phone

makes when you press the keys.

Your Kyocera Koi phone comes with four shortcuts

when in standby mode (swivel open).

1. Select Menu

→

Settings

→

Sounds

→

Press

Access your custom menu

Access recent calls

Key Length

2. Choose Normal or Long

3. Press

down

left

Launch Web browser

Record voice memo

right

Setting message alerts

You can choose how you want be alerted of

incoming voicemail, pages, or text messages.

Creating a custom menu

You can create a custom menu that contains your

favorite features. After you set up your menu,

1. Select Menu

→

Alerts

Settings

→

Messaging

→

simply press and hold

up to access it.

2. Select the type of alert: Message Alert Page

1. Press and hold

up to launch Custom Menu.

Alert, or Voicemail Alert.

2. Press

to select Manage List

3. Press

to select an option:

3. Scroll through the available options.

4. Press to select or deselect options. You may

–

Vibrate Once, Beep, Freeway!, Game!, Bloop!,

Winner!, Zilofon! sets the phone to alert you

once when a new message is received.

select more than one feature. Items appear in

alphabetical order in the menu.

5. Highlight Save Changes and press

Customizing Your Phone

Updating your custom menu

1. Press and hold

Personalizing the screen

Changing your banner

The banner is the personal label for your phone.

It appears on the home screen above the time and

date. The banner can be up to 14 characters long.

up to launch

Custom Menu

2. Press

to select Manage List.

3. Press

to select or deselect options.

4. Highlight Save Changes and press

1. Select Menu

→

Settings

→

Display

→

My Banner

Creating a shortcut to

frequent contacts

By default, your phone lists your entire contacts list

when you select Contacts. You can also set the

phone to show a list of your most frequent contacts.

2. Press

3. Press

4. Enter your new text.

5. Press to select Save

to select Edit

to clear the screen.

1. Select Menu

→

Settings

→

Convenience

→

Choosing a menu view

Frequent List

Three menu views are available:

2. Select Enabled to include the list or Disabled to

1. Select Menu

→

Settings

→

Display

→

Main

remove it.

Menu View, then the option you want:

Using the Frequent Contacts shortcut

•

From the home screen, press

to select

–

Wheel displays a graphical and

Contacts. Your 15 most frequently called

contacts appear at the top of the list, followed

by your complete contact list.

dynamic view.

–Graphic displays a graphical icon view

of menu items.

Choosing a different language

Your phone may display alternative languages.

1. Select Menu

→

Settings

→

Display

→

Language

–List displays a vertical text listing of

menu items.

2. Select a language, and press

User Guide for the Kyocera Koi Phone

Setting power backlighting

You can set backlighting to remain on when an

external power source, such as the AC adapter, is

used with the phone.

2. Press or

up or down to scroll menu

to select one.

views. Press

3. Press

to return to the home screen. The

next time you select Menu, you will see the

Note: Power backlighting may not be available with

menu view you selected.

the optional desktop charger or other accessories.

Adjusting the backlighting

1. Select Menu

→

Settings

→

Accessories

→

Your screen lights up while you are in a call or

when you press a key on the keypad. However, you

can set the length of time that bright backlighting

remains on.

Pwr Backlighting

2. Select Always On to keep backlighting on.

Note: The battery charges more slowly when

power backlighting is on.

1. Select Menu

→

Settings

→

Display

→

Backlighting

→

Duration

Changing the display contrast

2. Select an option from the list:

1. Select Menu

→

Settings

→

–

5 seconds, 10 seconds, or 30 seconds—

Display

→

Contrast

(Default) Turn backlighting on for 5, 10,

or 30 seconds after your last keypress.

2. Press

3. Press

left or right to adjust the contrast.

to select Save

–

5 sec. & in call, 10 sec. & in call, or 30 sec. &

in call—Turn backlighting on for the

duration of a call, and for 5, 10, or 30

seconds after your last keypress.

Setting numbers to auto-hyphenate

Auto-hyphenation, when enabled, automatically

inserts hyphens into your phone numbers to be

consistent with the U.S. dialing plan.

Note: These settings drain the battery more quickly

and reduce talk and standby times.

For example, 1-222-333-4444.

Using Power Save Mode

•

Select Menu

Auto-Hyphen

→

Settings

→

Display

→

You can conserve battery life by activating Power

Save mode to dim the backlight set in the procedure

above. The backlighting appears for the selected

duration but is less bright than with Power Save off.

→

Enabled.

Selecting a screen saver

Screen savers appear on the home screen when the

swivel is open or closed and are activated 10

seconds after the last keypress. Incoming calls and

alerts override screen savers.

•

elec

enu

→

Settings

→

Display

→

On.

Backlighting

→

Pwr Save Mode

→

Customizing Your Phone

1. Select Menu

→

Settings

→

Display

→

Choosing a different time/date format

1. Select Menu

Screen Saver

→

Settings

→

Display

→

2. Highlight a screen saver and press . The

Time/Date Format

image displays.

2. Highlight the option you want.

3. Press to save the setting.

3. Press

to assign the screen saver.

4. Press

to return to the home screen

and wait 10 seconds to view the screen saver

you chose.

Creating a secure environment

This section describes all the features involved in

securing your phone and preventing access to

personal information. All security features are

shielded by a four-digit lock code.

Note: Downloaded screen savers are added to

the end of the list.

Selecting wallpaper

Changing your lock code

The lock code is typically 0000 or the last 4 digits

of your phone number.

Wallpaper appears on the home screen.

1. Select Menu

→

Settings

→

Display

→

Wallpaper

1. Select Menu

→

Settings

→

Security.

2. Highlight a wallpaper design and press

2. Enter your four-digit lock code

3. Select Assign to save your selection.

3. Select New Lock Code. A message appears:

4. Press

to return to the home screen.

“Change Code?”

Selecting a color theme

You can select a color theme for the display

background of your phone.

4. Press

to select Yes and enter a new four-

digit code.

5. Enter your new lock code again.

1. Select Menu

→

Settings

→

Display

→

Locking your phone

Color Themes

When your phone is locked, you can call only

emergency numbers or your service provider

number. You can still receive incoming calls.

2. Scroll through the options to view the

color themes.

3. Highlight a color theme from the list and

1. Select Menu

→

Settings

→

Security.

press

2. Enter your four-digit lock code.

4. Press

to return to the home screen.

3. Select Lock Phone

User Guide for the Kyocera Koi Phone

4. Highlight an option:

Restricting calls

You can restrict the calls that can be made from

your phone to emergency numbers, your contacts,

and service provider numbers.

–

Never does not lock the phone.

On power up locks the phone every time you

turn it on.

–

Now locks the phone immediately.

1. Select Menu

→

Settings

→

Security

5. Press

2. Enter your four-digit lock code.

3. Select Limit Calls

Unlocking the phone

1. From the home screen, press

4. Choose an option:

select Unlock

–

No Limit limits no calls.

2. Enter your four-digit lock code.

Limit Outgoing calls only. Incoming calls can

still be received and answered.

Designating emergency numbers

The emergency numbers feature allows you to

specify three personal phone numbers that can be

called when the phone is locked.

–

Limit All calls, both incoming and outgoing.

Erasing all contacts

You can erase all entries from your

Contacts directory.

1. Select Menu

→

Settings

→

Security.

2. Enter your four-digit lock code.

1. Select Menu

→

Settings

→

Security.

3. Select Emergency Numbers

2. Enter your four-digit lock code.

4. Select an Unassigned slot.

3. Select Delete Contacts

5. Enter the phone number, including the area

4. Select Yes to erase all contacts. A message

code. Do not enter 1 before the area code.

appears: “Delete ALL Contacts?”

6. Press

to select Done.

5. Press

to select Yes to erase all contacts.

Notes:

•

You can view these numbers only when they’re

being entered for the first time.

Network settings

Switching between phone lines

Your phone can have two service accounts, or

phone lines, associated with it. Each phone line has

its own phone number.

•

You cannot edit these numbers.

To make a call to an emergency number from a

locked phone, you must dial the number

(including area code) exactly as it was stored in

Emergency Numbers.

Customizing Your Phone

When you are using one line, you cannot receive

calls from the other. It would be as if the phone

were “off” for that number. Your voicemail,

however, will still take messages. All contacts and

settings are shared for both lines.

Setting the phone to receive data

or faxes

Your phone may be able to receive certain data or

faxes, depending on the system sending the

information. You cannot receive voice calls while the

phone is in data/fax mode. To receive data or faxes,

you must connect the phone to a laptop or PC and

switch the phone from voice mode to data/fax mode.

Note: You must first establish a second phone line

with your service provider. Once established, a

second phone number becomes available in the

menu for selection:

Note: To purchase a cable call (800) 349-4188

(U.S.A. only), (858) 882-1410, or visit

1. Select Menu

→

Settings

→

Network

→

www.kyocera-wireless.com/store

Set Phone Line

2. Select one of the two lines and press

1. Connect the phone to the laptop or PC.

2. Set the Com speed.

Data Settings

Setting Com port speed

The Com Speed sets the data rate at which your

phone connects to a laptop or PC, or at which it

sends and receives over-the-air text messages.

3. Select Menu

→

Settings

→

Network

→

Data/Fax Calls

4. Press

to select an option:

–

Voice only—Allow only voice calls.

Fax, next call or Data, next call—Set the

phone to fax mode or data mode for the next

incoming call or the next 10 minutes.

1. Select Menu

→

Settings

→

Accessories

→

Com Port Speed

2. Select the speed. The options are: 19.2 kbps

–

Fax, until off or Data, until off—Force the

phone into fax mode or data mode until the

phone is turned off.

115.2 kbps (default), 230.4 kbps

Note: There may be a higher charge for making

calls using high-speed data in areas where 1X

service is available. Check with your service

provider for details.

Note: You cannot receive voice calls while the

phone is in data/fax mode.

User Guide for the Kyocera Koi Phone

Connecting to a TTY/TDD device

You can connect the phone to a TTY device for the

hearing impaired. Note: Enable TTY only when

using the phone with a TTY device.

1. Connect the TTY device to the phone.

2. Enter

your keypad.

3. Press to select the TTY option.

from

Setting position location

This setting allows you to share your location

information with network services other than

emergency services (911, 111, 999, 000, etc.), in

markets where service has been implemented.

Note: This feature works only when your phone is

in digital mode. You do not have the option of

turning off the locator to emergency services.

1. Select Menu

→

Settings

→

Network

→

Location

2. At the message prompt, press

to select OK

and continue.

3. Select 911 Only or Location On

–

911 Only (default) shares your position

information only with emergency services

when you call your 3-digit emergency code

(911, 000, 111, etc.).

–

Location On shares your position information

with your service provider’s network, in

addition to emergency services.

Customizing Your Phone

10 USING VOICE RECOGNITION

Voice recognition allows you to make and answer calls

by speaking commands into the phone’s microphone.

Editing a voice tag

1. Select Menu

→

Contacts

→

Voice Dial List.

Note: You cannot use voice recognition to end a

2. Highlight the contact you want to edit, and press

call; you must press

when the swivel is open,

to select it.

or press in when the swivel is closed.

3. Highlight the phone number, select Options

4. Select Add Voice Dial

Voice Dial

Edit Voice Dial, or Erase

Setting up voice dialing

To make or receive calls using voice dialing,

5. Follow the prompts.

contacts must be saved with associated voice tags.

Calling using voice tags

Creating a voice tag for a contact

1. If you haven’t already done so, record a voice

1. Select Menu

→

Contacts

→

Add Voice Dial.

tag for the person you wish to call.

2. Follow the voice prompts to record a name

2. With the swivel closed, press and hold in

-or-

for the contact.

3. Highlight an option:

With the swivel open, from the home screen, press

. The phone responds: “Say a name.”

–

Add new—Save a new contact to go with

the voice tag.

3. Say the name of the person you want to call.

–

Add to existing—Add the voice tag to a

4. If the name you said matches a contact in the

Voice Dial List, the phone responds: “Calling

(Name).” Remain silent to make the call, or say

No to cancel.

saved contact.

Viewing entries with voice tags

elec Voice Dial List.

•

enu

→

Contacts

→

Note: If the phone finds multiple voice tags that

sound like the name you said, you will be asked

to verify which name you want to call. Say Yes

when you hear the correct name. Say No when

you hear an incorrect name.

A list of all contacts with assigned voice

tags appears.

User Guide for the Kyocera Koi Phone

5. When you are finished with the call,

press if the swivel is open, or in

–

“

Call” to dial the number.

a“y

Verify” to cause phone to repeat the set

if the swivel is closed. You cannot end the

call with a voice command.

of digits that you input.

–

“

Cancel” to exit voice recognizer and

return to the home screen.

Erasing voice tags

To erase all voice name dial recordings in your phone:

Speak a digit to enter the next digit. Once

the phone repeats the digit, you can speak

the next digit or pause to hear the prompt.

1. Menu

→

Settings

→

Voice Features

→

Delete Voice Dial

Using voice features with

hands-free car kits

You can use voice commands to make a phone call

or to answer the phone only if your phone is

connected to a professionally installed Kyocera

hands-free car kit (sold separately).

2. Select Yes

Calling using digit dialing

When using digit dialing, you speak digits to dial a

phone number.

Note: You cannot speak a string of digits. You must

speak one digit at a time and wait for the prompt.

Note: The following features apply only to installed

hands-free car kits unless noted.

1. From the home screen, press

. The phone

responds: “Say a name or say Dial.”

To shop for hands-free car kits, visit

www.kyocera-wireless.com/store or call

800 349-4188 (U.S.A. only) or 858 882-1410.

2. Say “Dial”. The phone responds: “Speak a digit.”

3. Speak the first digit of the phone number you

want to call. Once the phone repeats the digit,

you can speak the next digit.

Waking up the phone

If your phone is connected to a Kyocera installed

hands-free car kit, you can use the voice command

to activate the phone to make a phone call.

If you pause, the phone will prompt you with

the following five options. After the prompt,

speak an option.

–

“Clear” to erase the digit last entered.

Note: Voice Wake-up does not work with

The phone responds: “Digit cleared.”

To clear the entire phone number, say

“Clear” again. When the phone prompts you

with “Clear entire phone number?”, say

“Yes” to clear or “No” to cancel.

Keyguard active.

To activate the Voice Wake-up setting:

1. Select Menu

→

Settings

→

Voice Features

→

Voice Wake-Up

→

With ext. pwr.

Using Voice Recognition

2. Select Menu

→

Settings

→

Keyguard

→

3. Select Menu

→

Settings

→

Silent Mode

→

Disabled, then press

Normal Sounds, then press

To wake up the phone:

To answer a call:

1. Say “Wake Up” and listen for a tone.

When you receive an incoming call, the phone

responds: “Incoming call, answer?” or “Incoming

roam call, answer?” If the caller is recognized as a

contact entry in your phone, then the phone will say

“Incoming call from (Name), answer?”

2. Say “Wake Up” again until you hear two tones.

If the phone does not recognize your

“Wake up” command, see “Training voice

recognition” on page 53.

•

“Yes” or press any key except the end key.

Answering the phone

You can set your hands-free car kit to (1) answer

automatically or (2) answer using a voice command.

Ignoring an incoming call

To ignore an incoming call, do one of the following:

•

“

No” and press

to silence the alert.

Answering automatically

You can set your phone to answer automatically.

Remain silent. The voice alert repeats twice

and the phone rings once, then returns to the

home screen.

Note: This setting also works with the portable

hands-free car kit.

Training voice recognition

•

elec

enu

→

Settings

→

Accessories

→

If your phone is having trouble recognizing your

Auto-Answer

→

After 5 secs

voice, you can train it with the commands Yes

Answering using voice commands

and Wake up

1. Select Menu

2. Select Voice Training

If Auto-Answer is turned off, you can use a voice

command to answer an incoming call using the

installed hands-free car kit.

→

Settings

→

Voice Features

3. Read the message and press

to select OK

•

elecM

enu

→

Settings

Disabled

→

Accessories

→

and continue. Cancel returns you to the

previous screen.

Auto-Answer

To activate the Voice Answer setting:

4. Select Train All or the item you want to train.

1. Select Menu

→

Settings

→

Voice Features

→

5. Follow the prompts for each word until training

Voice Answer

is complete.

2. Highlight Enabled, then press

User Guide for the Kyocera Koi Phone

11 TOOLS & GAMES

Voice Memo

4. Press . The recorded voice memo plays

through the phone’s speaker.

The Voice Memo tool allows you to record and play

back audio memos.

Tip: Press up or down to increase or

decrease the phone speaker volume.

Note: Voice memos can be up to 30 seconds

in duration.

5. To review the voice memo, press

left or right

to highlight the play icon

on the screen.

Recording a voice memo

1. SelectMenu→Tools&Games→VoiceMemo→

Record New. The phone says: “Please record at

the tone.”

6. Press . The recorded voice memo plays

through the phone’s speaker.

Tip: Press

7. Highlight the stop icon

finished listening to voice memo and press

to pause the voice memo.

on the screen when

2. Say your memo and press

to select Stop

when you are finished.

8. Press

to return to the home screen.

3. Press

to Save your voice memo, or press

Naming a saved voice memo

to Erase your voice memo.

1. SelectMenu→Tools&Games→VoiceMemo→

4. The prompt “Saved” appears.

Recorded Memos

5. Press

to return to the home screen.

2. Highlight the memo to save and press

Note: If an incoming call is received while

you’re recording a voice memo, the voice memo

is automatically saved and the incoming call screen

is displayed.

select Options

3. Press down to select and highlight Rename

4. Press . The prompt “Name:” appears along

with a flashing cursor.

Playing or reviewing a voice memo

5. Press

to clear the default name of the

1. SelectMenu→Tools&Games→VoiceMemo→

saved voice memo.

Recorded Memos.

6. Use the keypad to enter a new file name for the

2. Highlight the voice memo to play and press

saved voice memo.

to select Options

7. Select Save

3. Press

down to select and highlight Play.

8. Press

to return to the home screen.

Tools & Games

Sending a saved voice memo

Creating an event

1. Select Menu

2. Press down to select Add Event

1. SelectMenu→Tools&Games→VoiceMemo→

→

Tools&Games

→

Scheduler.

Recorded Memos

2. Highlight the memo to send and press

3. Enter a name for the event. For help entering

select Send. This will automatically take you to

the multimedia message function.

text, see page 26.

4. Select Next

3. Enter the recipient’s phone number or email

5. Enter the time, length, and alarm for event.

address in the To: field.

–

Press

minutes, and timing of alarm.

Press left or right to move between fields.

up or down to select hour,

4. Press

down once to enter a message in the

Subject: field.

–

5. Press

down once to enter a text message in

6. Select Next, enter a note if required.

7. Select Done

the Text: field.

6. Press

to select Send. This will send your

saved voice memo.

Viewing, editing, or erasing an event

1. Select Menu .

→

Tools&Games

→

Scheduler

Erasing a saved voice memo

2. Select View Day or View Month to find the event

1. SelectMenu→Tools&Games→VoiceMemo→

you want to view, edit, or erase.

Recorded Memos

3. Press

up, down, left, or right to highlight an

to select it.

right and press to select Edit or

2. Highlight the memo to erase and press

event and press

select Options

4. Press

3. Press down to select and highlight Erase

Options. Follow the prompts.

4. Press . The prompt “Erase file?” appears.

5. Press to return to the home screen or

5. Select Yes or No.

to return to scheduler options.

6. Press

to return to the home screen.

Alarm Clock

Scheduler

The Scheduler allows you to schedule events and

set reminder alerts.

Use the Alarm Clock to set an alert for a specific

time. The alert occurs only if the phone is on.

1. Select Menu

2. Select Set

→

Tools&Games

→

Alarm Clock

User Guide for the Kyocera Koi Phone

–

Press

and minutes.

up or down to select an hour

Calculator

Use the calculator for basic mathematical equations.

Press

left or right to switch between

1. Select Menu

→

Tools&Games

→

Calculator

hours, minutes, and a.m./p.m.

2. Use the keypad to enter numbers.

Use the phone keypad to enter numbers.

3. Use

to highlight mathematical operations.

to calculate the result.

3. Press

to select Done and save the setting.

4. Press

4. When the alarm rings, select Off to turn off the

alarm or Snooze to silence the alarm for

10 minutes.

Example: Enter 5, press

enter 2, then press

left to highlight

to obtain the result of 10.

5. Press

to return to the home screen.

to clear the screen.

Tip: Press

Navigation

Tip Calculator

The Tip Calculator helps you calculate how much

tip to include on a bill.

equal

divide

add

multiply

1. Select Menu

→

Tools&Games

→

Tip

subtract

Calculator

Options

2. Enter the amount of your bill.

3. Select Next

Adds displayed digit to the value stored

in memory.

M+

4. Select the amount you want to include as a tip

(10%, 15%, 18%, 20%, Other) and press

Your total bill appears, including tip.

Displays currently stored value on screen.

Clears value currently stored in memory.

5. To split the bill, press

to select Split.

Timer

6. Press to clear the default of 2 guests.

This timer counts down for a specified amount of

time. It beeps when that amount of time has elapsed.

7. Enter the number of guests and press

to select Next. The amount each guest pays

is calculated.

1. Select Menu

→

Tools&Games

→

Timer

2. Select Set

8. Select Done

3. Press

up or down to set the hours, minutes,

and seconds. To move the cursor, press

or right.

left

Tools & Games

4. Select Start and begin the countdown.

Select Stop to pause the countdown.

Select Reset to clear the timer.

2. Press

3. Highlight an option and press

New Game—Initiates game play. To pause the

game, press . You return to the menu

at the splash screen.

to select it.

5. Press

to silence the alarm and return to

where you can Continue Game or choose from

other available options.

the home screen.

Resume Saved—Returns you to the game you

were last playing.

Stopwatch

1. Select Menu

→

Tools&Games

→

Stopwatch.

Scoreboards—Displays the top five scores

for the different game variations.

2. Select Start to begin counting.

3. Select Stop to stop counting.

Settings—Choose a level of play, sounds,

and game type.

4. Select Reset to clear the counter.

5. Press

to return to the home screen.

Navigation: Use the following keys to guide the

blocks down the screen:

To:

Games

Use:

The games in this section may not be available

on your phone. Check with your service provider

for availability.

Rotate

Counterclockwise

, or

If you receive an incoming call alert while you are

playing Tetris™ or Race 21™, the game is paused

and exited. You can return to play once the call

alert ends. Games do not remain paused if the

phone is turned off or loses power.

Rotate clockwise

Move left

left

Move right

right

down

Tetris

The goal of this game is to guide the falling blocks

down the screen to create a solid horizontal row at

the bottom. The game ends when the new block

cannot enter the play field because the area is

occupied by another block or obstacle.

Soft drop

Hard drop

Return to Tetris menu

Pause/End Pause

1. Select Menu

→

Tools&Games

→

Tetris.

User Guide for the Kyocera Koi Phone

6. Select an option and press

to select it.

New Game—Initiates game play. To pause

the game, press . From here you can

Race 21

–

This game is a timed variation of Black Jack. Each

game comprises three 90-second rounds. To score

points, add cards in each of the four columns,

trying to reach but not exceed 21 in each column

within during the course of the game. To play:

choose Resume, New or Quit.

–

Resume Game—Returns you to the game

you were last playing.

1. Select Menu

2. Press

→

Tools&Games

→

Race 21.

Scoreboard—Provides you with the top

five scores.

at the splash screen.

Music—Choose when you hear music with

this game. Select from Music Always

3. Select New Game. The first card to be placed is

shown at the top left of the screen. Press a key

to add a card to the row as follows:

Sound

Effects

Instructions

Credits

During Title

or No Music.

Add cards to the first row

Add cards to the second row

Add cards to the third row

Add cards to the fourth row

7. Press

to end all games.

Doodler

You can create and save graphics on your phone.

Shortcut: Press

left or right to choose

1. Select Menu

2. Press

3. Select New Doodle to open the drawing screen

The cursor is located in the middle of the screen.

→

Tools&Games

→

Doodler.

arrows at the bottom of the screen. Then press

to add cards to corresponding rows.

Note: Each time you place a card, a new card

appears for placement.

at the splash screen.

4. Select Options to choose the Tools Lines, or

4. Continue placing cards until you are satisfied

Shape you want to use.

with your selections.

5. Use keys 1–9 or

to move

–

You can pause or end the game at any time

by pressing

the cursor around the screen

as indicated.

You lose points each time you exceed 21 in

a column.

6. When finished, select Options

→

Save. The image is saved

elec

to select

advance to the next round

kip to skip one card per round.

to My Pictures.

5. Press

to get your score and

Tools & Games

To move cursor away from drawing:

1. Select Options Tools

2. Select , then Done

Saving a doodle

It is a good idea to save the doodle while you are

working on it. If you receive a call while creating an

unsaved doodle, it will be lost.

→

3. Press a number key to move the cursor.

•

Select Options

The image will be saved in Menu

→

Save and press

To erase part of drawing:

→

Media

1. Select Options

→

Tools.

Gallery

→

Images

→

Doodles.

2. Select , then Done

3. Press a number key to move the eraser.

Resuming a doodle

To return to another saved doodle:

Select Menu

To Navigate: Use the following keys to doodle.

To:

Use:

•

→

Tools&Games

→

Doodler

Media

→

Select Options

Resume Doodle

Clear screen

Note: You can also go to Menu

→

Shortcut to Tools

Draw, erase, or move cursor/

shape UP

Gallery

→

Images

→

Doodles.

Draw, erase, or move cursor/

shape DOWN

Draw, erase, or move cursor/

shape LEFT

down

left

Draw, erase, or move cursor/

shape RIGHT

right

Return cursor to center

Previous screen

User Guide for the Kyocera Koi Phone

12 CONNECTING TO THE INTERNET

Using the Web Browser

3. Press

to select Yes to enable security.

When you are connected, a browser home page

appears. It has a list of bookmarks and some

Web menu options at the bottom of the screen.

You can use your phone to browse the Internet if

you have obtained phone Internet services from

your service provider and if over-the-air Internet

access is available in your area.

–

appears in a secure session.

An underline and an arrow indicate that

there is more text. Press down to view

to return to the

Note: You cannot receive incoming calls while you

are using the Web Browser.

more text. Press

previous screen.

Starting the Web Browser

1. Select Menu

→

Web Browser.

–

To choose a site, highlight it and press

to select Go

4. When you have finished using the Internet,

press to exit the browser.

A message about airtime fees appears every

time you start the browser.

To cancel the message, see “Changing the Web

prompt” on page 61.

Using the Web menu options

The following options may appear on your screen:

For more information about how airtime is

charged, contact your service provider.

•

Home returns you to the main Web Browser

window, or home page.

2. Press

to continue.

If this is the first time you have connected to the

Internet, a message informs you that security is

not yet enabled for your Web Browser.

•

Mark Site saves the current location as a

bookmark for easy access.

•

Bookmarks displays a list of your saved Web sites.

Setup gives you options for changing how

information is displayed.

–

Show URL displays the entire URL.

About Openwave displays information

about your Web Browser version.

Connecting to the Internet

–

Encryption should not be used unless you are

instructed to do so by your service provider.

Changing the Web prompt

1. Select Menu

→

Settings

→

Convenience

→

UP.Link selects a different browser server.

You can use this option if you have more

than one Web Browser account.

Web Prompt

2. Highlight an option and press

to select it:

–

At Start confirms that airtime fees will be

–

Restart restarts the Web Browser.

applied when you use the browser.

–

At End verifies you want to exit the browser.

Searching for a Web site

How you search for a Web site depends on your

service provider. For more information, contact

your service provider.

Both prompts you when you start the

browser and exit the browser.

–

No Prompts does not use any prompts.

Going to a bookmarked site

1. Select Menu

→

Web Browser. If you see a

message prompt, press

to continue.

2. From your Web home page, select Bookmarks

A list of bookmarks appears.

3. Enter the number corresponding to the

bookmark you want and press

Checking Net alerts

Alerts received from a Web site are sent to your Net

Alerts inbox.

1. Select Menu

→

Messages

→

Net Alerts.

This action launches the browser inbox.

2. Press

to accept browser fees.

3. Select an alert and follow the prompts.

User Guide for the Kyocera Koi Phone

13 GETTING HELP

Customer support

India:

Toll free#: 1-600-121214

Toll#: 0124-284-5000

Your service provider’s customer support

Mexico:

001-866-650-5103

department may be accessible directly from your

phone when you dial a number such as *611

(check with your service provider). They can

answer questions about your phone, phone bill,

call coverage area, and specific features available to

you, such as call forwarding or voicemail.

New Zealand: 0-800-990-100

Panama:

Peru:

001-800-201-1984

0-800-51-934

Puerto Rico:

Venezuela:

1-866-664-6443

0-800-100-2640

For questions about the phone features, refer to the

materials provided with your phone, or visit

Before requesting support, please try to reproduce

and isolate the problem. When you contact the

Customer Care Center, be ready to provide the

following information:

www.kyocera-wireless.com

For additional questions, you may contact the

Kyocera Wireless Corp. Customer Care Center in

any of the following ways:

•

The name of your service provider.

The actual error message or problem you

are experiencing.

•

Web site: www.kyocera-wireless.com

Email: [email protected]

•

The steps you took to reproduce the problem.

The phone’s electronic serial number (ESN).

Phone: 1-800-349-4478 (U.S. and Canada)

or 1-858-882-1401.

–

To locate the ESN select Menu

Info and scroll down to ESN: for the

11-digit number.

→

Phone

•

Customer support phone numbers are also

available in the following countries:

Argentina:

Australia:

Brazil:

0-800-666-0052

800-507-000

0-800-55-2362

800-43-1212

Chile:

Colombia:

01-800-700-1546

Getting Help

Qualified service

If the problem with your phone persists, return the

phone with all accessories and packaging to the

dealer for qualified service.

Phone accessories

To shop for Koi phone accessories, visit

www.kyocera-wireless.com/store. You may also

call us at (800) 349-4188 (U.S.A. only) or

(858) 882-1410.

Become a product evaluator

To participate in the testing and evaluation of

Kyocera Wireless Corp. products, including cellular

or PCS phones, visit beta.kyocera-wireless.com

User Guide for the Kyocera Koi Phone

INDEX

Numerics

Contacts directory, 16

contrast, 46

Tetris, 57

1-Touch dialing, 12

countdown timer, 56

hands-free car kit

answering using voice, 53

purchasing, v, 63

hands-free headset

purchasing, v, 63

hard pause, 16

custom menu

Alarm Clock, 8, 55

creating, 44

updating, 44

alerts

for messages, 44

for missed calls, 11

analog mode, 8

auto-hyphenation, 46

AutoText, 32, 33, 37

data/fax setup, 14, 49

digital mode, 8

Direct View, 35

display contrast, 46

Doodler, 58

icons, 8

InBox, 35

banner, 45

battery, 1

Kilobyte timer, 14

blocking outgoing calls, 48

emergency

calls, 13

language, 45

lights

lights-only mode, 8, 42

limiting calls out, 48

lock code, 47

locking

emergency mode, 14

exit emergency mode, 14

position location, 8, 50

erasing

Calculator, 56

call counters, 14

callback number, 33

calls

contact entries, 48

text messages, 36

answering, 10

ending, 9

phone, 47

ignoring, 10

missed, 11

Fast Find, 18

memory, saving, 36

menu view, 45

redialing, 9

fax mode, 49

silencing, 10

finding a saved phone number, 18

camera

flip

menu options, 22

recording video, 23

sending a picture, 22

setting up, 19

taking a picture, 19

color themes, 47

Com Port speed, 49

answering calls, 10

frequent contacts, 18

number mode, 26

games

OutBox, 34

Doodler, 58

Race 21, 58

phone book (Contacts directory),

Index

phone numbers

editing, 17

Stopwatch, 57

symbol mode, 27

finding, 18

saving, 16

verifying your own, 7

technical support, 62

Tetris, 57

phone, unlocking, 47

position location, 8, 50

power save mode, 9

prepend, 11, 17

text entry, 26

quick reference, 28

text messages, 32, 38

time format, 47

Timer, 56

Race 21, 58

recent call icons, 11

resetting the phone, iv

ringers

timing calls, 14

Tip Calculator, 56

TTY/TDD, 50

choosing types, 42

for roaming calls, 15

silencing, 7

unlocking the phone, 48

vibrate, 8, 42

Voice Answer, 53

voice dialing, 51

voice memo

erasing, 55

naming, 54

recording, 54

voicemail, 13

setting up, 7

volume

volume, 43

roaming, 8

alerts, 15

controlling, 14

ringer, 15

saved phone numbers

editing, 17

finding, 18

Scheduler, 55

screen contrast, 46

screen icons, 8, 26, 34, 42

screen savers, 46

secret contacts, 11

security, 47

earpiece, 13, 43

key beep, 44

ringer, 43

wallpaper, 47

Web Browser, 60

silent mode, 8, 42

speakerphone

turning off, 11

turning on, 10

User Guide for the Kyocera Koi Phone

KitchenAid KEBN100Y User Manual
Lantronix XPORT 900 563 User Manual
LG Electronics LG Life Good Computer Monitor M2380DF User Manual
Lindy 51185 User Manual
LSI SAS2 User Manual
Motorola S803 User Manual
Philips 2 44E+03 User Manual
Philips 21PT3136 User Manual
Philips 27PS 50B User Manual
Philips Brilliance 200P3G User Manual